Electronic Components Datasheet Search |
|
SK-B29B1-FREQ Datasheet(PDF) 2 Page - Nel Frequency Controls,inc |
|
SK-B29B1-FREQ Datasheet(HTML) 2 Page - Nel Frequency Controls,inc |
2 / 2 page Operating Conditions and Output Characteristics Electrical Characteristics Parameter Symbol Conditions Min Typical Max Frequency — — 350.0 MHz — 1.7 GHz Duty Cycle — @50% points 45/55% — 55/45% Logic 0(1) VOL — VCC -1.810 V — VCC -1.620 V Logic 1(1) VOH — VCC -1.025 V — VCC -0.880 V Rise & Fall Time tr, tf 20-80% V O with 50 ohm load to VCC -2V — 350 psec 600 psec Jitter, RMS(4) — — — 0.3 psec 0.5 psec Enable Voltage(2) — with VEE = 0V 0 V — 1.0 V Disable Voltage — with VEE = 0V 3.0 V — VCC Frequency Stability(3) dF/F Overall conditions including: -100 ppm — +100 ppm voltage, calibration, temp., 10 yr aging, shock, vibration General Characteristics Parameter Symbol Conditions Min Typical Max Supply Voltage VCC 3.3V±5% 3.135 V 3.3 V 3.465 V Supply Current ICC 50 ohm termination 0.0 mA — 160 mA To 2.00V below VCC Output Current IO Low level Output Current 0.0 mA — ±50.0 mA Operating Temperature TA — 0ºC — 70ºC Storage Temperature TS — -55ºC — 125ºC Input: Logic High (ECL) - Disables VEE or Open - Enables Lead Temperature TL Soldering, 10 sec. — — 300ºC Load 50 ohm to VCC-2V or Thevenin Equivalent, Bias Required Start-up Time tS — — 2 ms 10 ms Environmental and Mechanical Characteristics Mechanical Shock Per MIL-STD-202, Method 213, Condition E Thermal Shock Per MIL-STD-833, Method 1011, Condition A Vibration 0.060” double amplitude 10 Hz to 55 Hz, 35g’s 55 Hz to 2000 Hz Soldering Condition 300ºC for 10 seconds Hermetic Seal Leak rate less than 1 x 10-8 atm.cc/sec of helium Footnotes: 1) VOL, VOH, referenced to ground. 2) Open to Enable pin also enables the output. 3) Standard frequency stability (others available). 4) Jitter performance is frequency dependent. Please contact factory for full Aeroflex characterization. RMS jitter bandwidth of 12kHz to 20MHz. Differential Positive ECL (DPECL) SK-A29B0 Series Rev D Frequency Range: 350.0 MHz to 1.7 GHz Test Circuit Test Circuit uses a split supply of +2V and -1.3V for ease of testing. 1 7 8 2,6,9,13 B10 |
Similar Part No. - SK-B29B1-FREQ |
|
Similar Description - SK-B29B1-FREQ |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |