High Speed, Rail-to-Rail Output,

Op Amp with Ultralow Power-Down

ADA4850-1/ADA4850-2

Rev. A

Information furnished by Analog Devices is believed to be accurate and reliable.

However, no responsibility is assumed by Analog Devices for its use, nor for any

infringements of patents or other rights of third parties that may result from its use.

Specifications subject to change without notice. No license is granted by implication

or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

www.analog.com

Fax: 781.461.3113

©2005 Analog Devices, Inc. All rights reserved.

FEATURES

Ultralow power-down current: 150 nA/amp max

Low quiescent current: 2.4 mA/amp

High speed

175 MHz −3 dB bandwidth

220 V/µs slew rate

85 ns settling time to 0.1%

Excellent video specifications

0.1 dB flatness: 14 MHz

Differential gain: 0.12%

Differential phase: 0.09°

Single-supply operation: 2.7 V to 6 V

Rail-to-rail output

Output swings to within 80 mV of either rail

Low voltage offset: 0.6 mV

APPLICATIONS

Portable multimedia players

Video cameras

Digital still cameras

Consumer video

PIN CONFIGURATIONS

1

POWER DOWN

2

NC

3

–IN

4

+IN

7 OUTPUT

6 NC

ADA4850-1

NC = NO CONNECT

Figure 1. 8-Lead, 3 mm × 3 mm LFCSP

NC = NO CONNECT

1

2

–IN1

3

+IN1

4

10 –IN2

9

+IN2

ADA4850-2

Figure 2. 16-Lead, 3 mm × 3 mm LFCSPP

GENERAL DESCRIPTION

The ADA4850-1, ADA4850-21 are low price, high speed,

voltage feedback rail-to-rail output op amps with ultralow

power-down. Despite their low price, the ADA4850-1/

ADA4850-2 provide excellent overall performance and

versatility. The 175 MHz −3 dB bandwidth and 220 V/µs

slew rate make these amplifiers well-suited for many general-

purpose, high speed applications.

The ADA4850-1/ADA4850-2 are designed to operate at supply

voltages as low as 2.7 V and up to 6 V at 2.4 mA of supply

current per amplifier. In power-down mode, the supply current

is less than 150 nA, ideal for battery-powered applications.

The ADA4850 family provides users with a true single-supply

capability, allowing input signals to extend 200 mV below the

negative rail and to within 2.2 V of the positive rail. The output

of the amplifier can swing within 80 mV of either supply rail.

With its combination of low price, excellent differential gain

(0.12%), differential phase (0.09º), and 0.1 dB flatness out to

14 MHz, these amplifiers are ideal for video applications.

The ADA4850-1/ADA4850-2 are designed to work in the

extended temperature range of −40°C to +125°C.

1

100

10

1000

FREQUENCY (MHz)

–6

–4

–5

–2

–3

0

–1

2

1

G = +1

Figure 3. Small Signal Frequency Response