www.ti.com

ABSOLUTE MAXIMUM RATINGS

DISSIPATION RATINGS

(1)

RECOMMENDED OPERATING CONDITIONS

THS7318

SLOS517A – JANUARY 2007 – REVISED FEBRUARY 2007

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be

more susceptible to damage because very small parametric changes could cause the device not to meet its published

specifications.

VALUE

UNIT

5.5

V

Input voltage

V

Output current

±100

mA

Continuous power dissipation

See Dissipation Rating Table

150

°C

Maximum junction temperature

125

°C

Storage temperature range

–65 to 150

°C

HBM

2000

V

ESD ratings

CDM

1500

V

MM

200

V

(1)

Stresses above those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied Exposure to absolute maximum rated conditions for extended periods may degrade device reliability.

(2)

The absolute maximum junction temperature under any condition is limited by the constraints of the silicon process.

(3)

The absolute maximum junction temperature for continuous operation is limited by the package constraints. Operation above this

temperature may result in reduced reliability and/or lifetime of the device.

θ

JC

θ

JA

PACKAGE

(

°C/W)

(

°C/W)

YZF

38

105

950 mW

428 mW

(1)

This data was taken with the JEDEC High-K test PCB.

(2)

Power rating is determined with a junction temperature of 125

°C. This is the point where distortion starts to substantially increase and

long-term reliability starts to be reduced. Thermal management of the final PCB should strive to keep the junction temperature at or

below 125

°C for best performance and reliability.

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

Supply voltage

2.85

5

V

Ambient temperature

0

70

°C

2

Submit Documentation Feedback