© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

Capacitance Value

F-9073B 9/06

Electrical Parameters

As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with the following specific requirements

based on room temperature (25°C) parameters:

•

Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to the ± 15% over that range.

•

Insulating Resistance (IR) measured after 2 minutes at rated voltage @25°C: Limit is 500 megohm-

microfarads or 10,000M

Ω, whichever of the two is smaller.

•

Capacitance and Dissipation Factor (DF) are measured under the following conditions:

1kHz and 1 Vrms if capacitance

* 10µF

120Hz and 0.5 Vrms if capacitance

$ 10µF

•

DF limits:

50 -200 Volts

ü 2.5%

16 -25 Volts

ü 3.5%

6.3 / 10 Volts

ü 5.0%

Soldering Process

All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide

excellent solderability as well as resistance to leaching. The recommended mounting techniques are as follows:

•

0402 / 1210 case sizes

ü Solder Reflow

•

0603 / 0805 / 1206 case sizes

ü Solder Wave / Solder Reflow

Marking

These chips will be supplied unmarked. If required, they can be laser-marked as an extra option.

Details on the marking format are included in KEMET Surface Mount catalog F3102.

In general, the information provided in the KEMET Surface Mount catalog F3102 applies to these

capacitors. The Information in this bulletin supplements that in the catalog

Capacitance

Value (

µF)

KEMET Part Number

Voltage

Capacitance

Tolerance

Thickness

Qty

7" Reel

Qty

13" Reel

0.22

C0805F224_3RAC

25

K, M

0.90 (.035) ± 0.10 (.004)

4,000

10,000

0.22

C0805F224_5RAC

50

K, M

1.25 (.049) ± 0.15 (.006)

2,500

10,000

0.47

C0805F474_4RAC

16

K, M

1.00 (.039) ± 0.10 (.004)

2,500

10,000

0.47

C0805F474_3RAC

25

K, M

1.25 (.049) ± 0.15 (.006)

2,500

10,000

0.68

C0805F684_4RAC

16

K, M

1.25 (.049) ± 0.15 (.006)

2,500

10,000

0.47

C1206F474_5RAC

50

K, M

0.90 (.035) ± 0.10 (.004)

4,000

10,000

1

C1206F105_3RAC

25

K, M

0.90 (.035) ± 0.10 (.004)

4,000

10,000

1

C1206F105_5RAC

50

K, M

1.60 (.063) ± 0.20 (.008)

2,000

8,000

2.2

C1206F225_4RAC

16

K, M

0.90 (.035) ± 0.10 (.004)

4,000

10,000

2.2

C1206F225_3RAC

25

K, M

1.60 (.063) ± 0.20 (.008)

2,000

8,000

4.7

C1206F475_4RAC

16

K, M

1.60 (.063) ± 0.20 (.008)

2,000

8,000

2.2

C1210F225_5RAC

50

K, M

1.70 (.067) ± 0.20 (.008)

2,000

8,000

4.7

C1210F475_4RAC

16

K, M

1.25 (.049) ± 0.15 (.006)

2,500

10,000

4.7

C1210F475_3RAC

25

K, M

1.70 (.067) ± 0.20 (.008)

2,000

8,000