SN54LV174A, SN74LV174A

HEX DTYPE FLIPFLOPS

WITH CLEAR

SCLS401G − APRIL 1998 − REVISED APRIL 2005

2

POST OFFICE BOX 655303

FUNCTION TABLE

INPUTS

OUTPUT

CLR

CLK

D

OUTPUT

Q

L

X

X

L

H

↑

HH

H

↑

LL

H

L

X

Q0

logic diagram (positive logic)

1D

C1

R

To Five Other Channels

1

9

3

2

CLR

CLK

1D

1Q

Pin numbers shown are for the D, DB, DGV, J, NS, PW, and W packages.

−0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high-impedance

−0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±25 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

73

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DB package

82

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DGV package

120

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NS package

64

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package

108

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

2. This value is limited to 5.5 V maximum.

3. The package thermal impedance is calculated in accordance with JESD 51-7.