Electronic Components Datasheet Search |
|
TDA8005AG Datasheet(PDF) 2 Page - NXP Semiconductors |
|
TDA8005AG Datasheet(HTML) 2 Page - NXP Semiconductors |
2 / 36 page 1998 Mar 20 2 Philips Semiconductors Preliminary specification Low-power (3 V/5 V) smart card coupler TDA8005A FEATURES • Smart card supply (5 and 3 V ±5%, 20 mA maximum with controlled rise and fall times) • Smart card clock generation (up to 8 MHz), with two times synchronous frequency doubling • Clock STOP HIGH, clock STOP LOW or 1.25 MHz (from internal oscillator) for cards power-down mode • Specific UART on I/O for automatic direct/inverse convention settings and error management at character level • Automatic activation and deactivation sequences through an independent sequencer • Supports the protocol T = 0 in accordance with ISO 7816 GSM11.11 requirements (Global System for Mobile communication); approved for Final GSM11.11 Test Approval (FTA) • Several analog options are available for different applications: doubler or tripler DC-to-DC converter, card presence, active HIGH or LOW, threshold voltage supervisor, etc. • Overloads and take-off protections • Current limitations in the event of short-circuit • Special circuitry for killing spikes during power-on or off • Supply supervisor • Step-up converter (supply voltage from 2.5 to 6 V) • Power-down and sleep mode for low power consumption • Enhanced ElectroStatic Discharge (ESD) protections on card side (6 kV minimum) • Control and communication through a standard RS232 full-duplex interface • Optional additional I/O ports for: – keyboard – LEDs – display – etc. • P80CL51 microcontroller core with 4-kbyte ROM and 256-byte RAM. APPLICATIONS • Portable smart card readers for protocol T = 0 • GSM mobile phones. GENERAL DESCRIPTION The TDA8005A is a low-cost card interface for portable smart card readers. Controlled through a standard serial interface, it takes care of all ISO 7816 and GSM11.11 requirements for both 5 and 3 V cards. It gives the card and the set a very high level of security, due to its special hardware against ESD, short-circuiting, power failure, etc. Its integrated step-up converter allows operation within a supply voltage range of 2.5 to 6 V. The very low power consumption in power-down and sleep modes saves battery power. Development tools, application report and support (hardware and software) are available. ORDERING INFORMATION TYPE NUMBER PACKAGE NAME DESCRIPTION VERSION TDA8005AG LQFP64 plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm SOT314-2 TDA8005AH QFP44 plastic quad flat package; 44 leads (lead length 1.3 mm); body 10 × 10 × 1.75 mm SOT307-2 |
Similar Part No. - TDA8005AG |
|
Similar Description - TDA8005AG |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |