LA78040N

PS No.7880-4/4

Application Circuit Example 2 (Dual power supply)

This catalog provides information as of September, 2005. Specifications and information herein are subject

to change without notice.

! Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent

device, the customer should always evaluate and test devices mounted in the customer's products or

equipment.

! SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could give

rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that

could cause damage to other property. When designing equipment, adopt safety measures so that these

kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits

and error prevention circuits for safe design, redundant design, and structural design.

! In the event that any or all SANYO products (including technical data, services) described or contained

herein are controlled under any of applicable local export control laws and regulations, such products

must not be exported without obtaining the export license from the authorities concerned in accordance

with the above law.

! No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system, of

otherwise, without the prior written permission of SANYO Electric Co., Ltd.

! Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for

the SANYO product that you intend to use.

! Information (including circuit diagrams and circuit parameters) herein is for example only; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no

guarantees are made or implied regarding its use or any infringements of intellectual property rights or

hi h

f hi d

i

Vref

+VCC

IN

-VCC

LA78045

1

2

3

4

5

6

7