Electronic Components Datasheet Search |
|
PCM1609A Datasheet(PDF) 14 Page - Texas Instruments |
|
|
PCM1609A Datasheet(HTML) 14 Page - Texas Instruments |
14 / 43 page www.ti.com AUDIO SERIAL INTERFACE AUDIO DATA FORMATS AND TIMING PCM1609A SLES145A – AUGUST 2005 – REVISED AUGUST 2006 The audio serial interface for the PCM1609A consists of a 5-wire synchronous serial port. It includes LRCK (pin 41), BCK (pin 40), DATA1 (pin 45), DATA2 (pin 46), DATA3 (pin 47), and DATA4 (pin 31). BCK is the serial audio bit clock, and is used to clock the serial data present on DATA1, DATA2, DATA3, and DATA4 into the audio interface serial shift register. Serial data is clocked into the PCM1609A on the rising edge of BCK. LRCK is the serial audio left/right word clock. It is used to latch serial data into the serial audio interface internal registers. Both LRCK and BCK must be synchronous to the system clock. Ideally, it is recommended that LRCK and BCK be derived from the system clock input, SCKI. LRCK is operated at the sampling frequency (fS). BCK can be operated at 32, 48, or 64 times the sampling frequency (I2S format does not support BCK = 32 fS). Internal operation of the PCM1609A is synchronized with LRCK. Accordingly, internal operation of the device is suspended when the sampling rate clock (LRCK) is changed, or when SCKI and/or BCK is interrupted at least for a 3-bit clock cycle. If SCKI, BCK, and LRCK are provided continuously after this suspended state, the internal operation is resynchronized automatically within a period of less than 3/fS. During this resynchronization period and for a 3/fS time thereafter, the analog outputs are forced to the bipolar zero level, VCC/2. External resetting is not required. The PCM1609A supports industry-standard audio data formats, including standard, I2S, and left-justified (see Figure 22). Data formats are selected using the format bits, FMT[2:0], in register 9. The default data format is 24-bit standard. All formats require binary 2s complement, MSB-first audio data. See Figure 23 for a detailed timing diagram of the serial audio interface. DATA1, DATA2, DATA3, and DATA4 each carry two audio channels, designated as the left and right channels. The left-channel data always precedes the right-channel data in the serial data stream for all data formats. Table 2 shows the mapping of the digital input data to the analog output pins. 14 Submit Documentation Feedback |
Similar Part No. - PCM1609A |
|
Similar Description - PCM1609A |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |