www.ti.com

EQUIVALENT INPUT AND OUTPUT SCHEMATIC DIAGRAMS

IN +

INPUTS

OUT +

OUTPUTS

300 k

Ω

400

Ω

SEL, EN

7 V

7 V

7 V

7 V

7 V

IN -

OUT -

ABSOLUTE MAXIMUM RATINGS

SN65LVCP22

SLLS553B – NOVEMBER 2002 – REVISED JUNE 2003

UNITS

–0.5 V to 4 V

CMOS/TTL input voltage (ENO, EN1, SEL0, SEL1)

–0.5 V to 4 V

LVDS receiver input voltage (IN+, IN–)

–0.7 V to 4.3 V

LVDS driver output voltage (OUT+, OUT–)

–0.5 V to 4 V

LVDS output short circuit current

Continuous

Storage temperature range

–65°C to 125

°C

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

235

°C

Continuous power dissipation

See Dissipation Rating Table

All pins

±5 kV

Electrostatic discharge

All pins

±500 V

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential I/O bus voltages, are with respect to network ground terminals.

(3)

Tested in accordance with JEDEC Standard 22, Test Method A114-A.

(4)

Tested in accordance with JEDEC Standard 22, Test Method C101.

3

Submit Documentation Feedback