Everlight Electronics Co., Ltd.

http:\\www.everlight.com

Document No: DCS-015-001 Rev2.0

Nov. 15, 2007

8

Surface - Mount

RGB Color Sensor

CLS15-22C/L213R/TR8

CLS15-22C/L213G/TR8

CLS15-22C/L213B/TR8

Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350

℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and

more intervals, and do soldering of each terminal. Be careful because the damage of the

product is often started at the time of the hand solder.

Repairing

Repair should not be done after the device have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be

confirmed beforehand whether the characteristics of the device will or will not be

damaged by repairing.