Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

LANE-6KV Series

Single and Dual Output

1 Watt DC/DC Converter

7 pin SIP with 6KVDC Isolation

DESIGN & FEATURE CONSIDERATONS

Input Source Impedance

The power module should be connected to a low ac-impedance input source. Highly inductive source

impedances can affect the stability of the power module.

In applications where power is supplied over long lines and output loading is high, it may be necessary

to use a capacitor at the input to ensure startup.

Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to

use a good quality low Equivalent Series Resistance (ESR < 1.0Ω at 100 KHz) capacitor of a 2.2uF for

the 5V input devices and a 1.0uF for the 12V input devices.

Maximum Capacitive Load

The LANE-6KV Series has a limitation of maximum connected capacitance at the output. The power

module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup

time.

For optimum performance we recommend 220uF maximum capacitive load for dual outputs and 680uF

capacitive load for single outputs. The maximum capacitance can be found in the Output Voltage /

Current Rating Chart.