Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

LANEH2 SERIES

3KVDC I/O Isolation

Single and Dual Output

2 Watt DC/DC Converter

FEATURES

● 7 Pin SIP Package

● 3000VDC Isolation

● Single and Dual Outputs

● Unregulated Output Types

● UL 94V-0 Package Material

● 3.3, 5, 12, 15, 24, and 48VDC Input Voltages Available

DESCRIPTION

When your application demands low power, minimal board space, and a high level of input/output isolation is

necessary, the LANEH2 miniature converters offer superior solutions at an economical price. Users have a multitude

of options and operational ratings to choose from in custom-tailoring the converter to application demands.

Populating a scant 0.179 square inches of board space, the LANEH2 provides two watts of power while maintaining

specifications over the entire commercial operating temperature range.

All specifications apply @ ±25°C ambient unless otherwise noted

INPUT SPECIFICATIONS

Input Voltage Range .......3.3V nom. input .......... 3.14 – 3.47 VDC

5V nom. input .............. 4.75 – 5.25VDC

12V nom. input ............. 11.4– 12.6VDC

15V nom. Input ........ 14.25 – 15.75VDC

24V nom. input ........... 22.8 – 25.2 VDC

48V nom. input ........... 45.6 – 50.4 VDC

OUTPUT SPECIFICATIONS

Output Current ................................................................ see table

Output Voltage ................................................................ see table

Output Voltage Accuracy ....................................................... ±5%

Line Regulation ........................................1.2%/1% of Vin (typical)

Load Regulation (10% to 100% full load) .......................10% max.

Ripple/Noise (20MHz BW) ................................... 150mVp-p max.

PROTECTION

Short Circuit Protection .................................................Short term

GENERAL SPECIFICATIONS

Switching Frequency ............................................. 100KHz typical

Efficiency .....................................................................75% typical

Isolation Voltage (input to output) ..............3000VDC (2sec/0.5mA)

Isolation Resistance.................................. 1000MΩ min. (500VDC)

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature .............................................. 0°C ~ +70°C

“I” suffix................................................................. -40°C ~ +85°C

Humidity.........................................................95% non-condensing

Cooling .............................................................Free air convection

PHYSICAL SPECIFICATIONS

Weight .....................................................Approximately 2.1 grams

Case Material......................................non-conductive black plastic

Dimensions ...............................19.50(L) x 7.10(W) x 10.00(H) mm

Due to advances in technology, specifications subject to change without notice