Rev. A/DX 2007-06-04

TGL41-6.8 - TGL41-170CA

400W Surface Mount Transient

Voltage Suppressor

Page 1 of 6

Tel: (800)-TAITRON

(800)-824-8766

(661)-257-6060

Fax: (800)-TAITFAX

(800)-824-8329

(661)-257-6415

400W Surface Mount Transient Voltage Suppressor

Features

• Breakdown voltage from 6.8 to 170 volts

• Glass passivated junction

• Excellent clamping capability

• Low incremental surge resistance

• 400W peak pulse capability with a 10/1000us waveform,

Repetition rate (duty cycle): 0.01%

• High temperature soldering guaranteed 250°C/10 seconds at terminals

• RoHS Compliant

Mechanical Data

Case:

JEDEC DO-213AB (MELF) molded plastic body over passivated junction

Epoxy:

Plastic package has UL flammability classification 94V-0

Terminals:

Solder plated, solderable per MIL-STD-750, Method 2026

Polarity:

Blue bands denotes the cathode which is positive with respect to the anode under normal TVS operation

Mounting position:

Any

Weight:

0.0046 Ounce, 0. 116 gram

Symbol

Description

Value

Unit

Conditions

Peak Pulse Power Dissipation

on 10/1000 us waveform

Minimum 400

W

Non-repetitive current pulse, per FIG.3 and

Peak Pulse current with a

10/1000 us waveform

See Table

A

Peak Forward Surge Current

40

A

8.3ms single half sine-wave superimposed

on rated load, (JEDEC Method)

Operating Junction and Storage

Temperature Range

-55 to 150

° C

Note:

Mounted on copper pads to each terminal of 0.31 in² (8.0 mm²) per Fig.5

MELF (DO-213AB)