Performance Characteristics

Parameter

Output Options:

AC = ACMOS

0.5 to 160 MHz

HC = HCMOS

0.5 to 160 MHz

TD = 10 TTL

0.5 to 160 MHz

RG = 0 dBm 50 ohm

3.0 to 30 MHz

RC = +7.0 dBm 50 ohm

3.0 to 90 MHz

Stability Options:

A17 =

± 0.1 ppm

0˚C to +50˚C

B37 =

± 0.3 ppm

0˚C to +70˚C

C57 =

± 0.5 ppm

-20˚C to +70˚C

D16 =

± 1.0 ppm

-40˚C to +85˚C

EA6 =

± 1.5 ppm

-55˚C to +85˚C

(Other stability

options are available)

Supply Voltage:

AC = +12 Vdc

± 5%

HC = +12 Vdc

± 5%

TD = +12 Vdc

± 5%

RG = +5 Vdc

± 5%

RC = +12 Vdc

± 5%

(Other voltage

options are available)

Allan Variance (typical):

Aging (at 10MHz):

"1 ppm Forever"

< 0.2 ppm / 1st year

< 0.7 ppm / 10 years

SATCOM

< 0.5 ppm / 1st year

< 2.0 ppm / 10 years

Phase Noise (typical):

-110 dBc / Hz

@ 10 Hz offset

-135 dBc / Hz

@ 100 Hz offset

-150 dBc / Hz

@ 1 kHz offset

-155 dbc / Hz

@ 100 kHz offset

10 MHz, RC option

Typical P/N:

(SATCOM)

RCR7HYA17C 10.00 MHz

("1 ppm Forever")

RGR5HXB37C 15.00 MHz

HY is predetermined, HX is for "1 ppm Forever" max temp range -20 to +70

Note: Not all stabilities are available with all options. Vectron International does not recommend wave

soldering, IR reflow or other elevated temperature processing without consulting the factory.

For AC, HC and TD outputs with frequencies above 30 MHz a low phase noise PLL multiplier will be used.

Please inform the factory of your phase noise requirements.

Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON

2

SATCOM / "1 ppm Forever" TCXO

Characteristics