© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice

Fara109d.doc

Page 1 of 3

Feb-01(F)

INPUT

Parallel multiplexed component signals to CCIR Rec 656

SMPTE RP-125 coded.

Note. To ease interfacing into equipment data is latched by the rising edge of the clock.

Data rate

27 MHz

Data Set up time

3 ns min to positive edge of clock

Data hold time

2.5 ns min from positive edge of clock

Line standard

625/50 or 525/60 Auto detection

Analogue Output Characteristics

Output signal

PAL-I, NTSC-M, according to line input standard - auto sensing

No of Outputs:

2

Output Impedance

75 Ohms ±1%

Output return loss

> 40 dB to 5.5 MHz

Resolution

10 bit

Freq. Response

< 0.15 dB to 5.5 MHz (with eq set to minimum and gain at 0 dB)

< 0.3 dB to 5.75 MHz

Chroma filtering as specified by CCIR624-3. Equal I/Q filtering for NTSC

K-ratings

kp, kpb, kbar < 0.5%

Chroma/luma gain inequality

< 0.1 dB

Chroma/luma delay inequality

< 10 ns

Differential phase

< 1.0 degree

Differential gain

< 0.5%

Noise

> 70 dB rms to 5.5 MHz

Power

+ 5V ±0.25V (550mA max)

Operating Temp

0

°C to 40°C

Note: This item is NOT aqueous washable.

PI-003

PARALLEL DATA TO CVBS 10 BIT