Specification

15-24 Watts

•

Output Voltages from 3- 48 VDC Available

•

Non-Standard Outputs

•

Universal Input

•

+70 ºC Operating Temperature

•

High Efficiency - Up to 85%

•

Class 1 Earthing

•

Non-standard Connectors Available

AEH Series

Input

Input Voltage

• 90-264 VAC

Input Frequency

• 47-63 Hz

Input Current

• 0.4 A for AEH15, at 230 VAC

0.7 A for AEH24, at 230 VAC

Inrush Current

• 15/30 A max at 115/230 VAC 100% load,

cold start

Earth Leakage Current

• <0.5 mA max at 115 VAC/60Hz

<0.75 mA max at 230 VAC/50Hz

Output

Output Voltage

• See tables (factory set). Non-standard

voltages available - contact sales

Initial Set Accuracy

• 5%

Start Up Delay

• 2 s max

Hold Up Time

• 20 ms min at full load and 115 VAC

Line Regulation

• See tables

Load Regulation

• See tables

Transient Response

• 4% max. deviation, recovery to within

1% in 500 µs for a 25% load change

Ripple & Noise

• 2% pk-pk, 20 MHz BW

Overvoltage Protection • 112-132% Vnom, auto reset

Overload Protection

• 112-132% of nominal, auto recovery

Temperature

• ±0.04% /˚C max

Coefficient

xppower.com

General

Efficiency

• Up to 85%

Isolation

• 3000 VAC Input to Output

1500 VAC Input to Ground

500 VAC Output to Ground

MTBF

• 100 kHrs per MIL-HDBK-217F

Environmental

Operating Temperature • 0 ˚C to +70 ˚C, derate linearly from

full load at +40 ˚C to half load at +70 ˚C

Operating Humidity

• 5-95 % RH, non-condensing

Storage Temperature

• -40 ˚C to +85 ˚C

Vibration

• 2 g on 3 axes

EMC & Safety

Emissions

• EN55022 level B, conducted and radiated

Harmonic Currents

• EN61000-3-2, Class A

Voltage Flicker

• EN61000-3-3

ESD Immunity

• EN61000-4-2, level 2 Perf Criteria A

Radiated Immunity

• EN61000-4-3, level 3 Perf Criteria A

EFT/Burst

• EN61000-4-4, level 2 Perf Criteria A

Surge

• EN61000-4-5, level 3 Perf Criteria A

Conducted Immunity

• EN61000-4-6, level 2 Perf Criteria A

Dips & Interruptions

• EN61000-4-11 30% 10 ms,

60% 100 ms, 100% 5000 ms

Perf Criteria A, B, B

Safety Approvals

• EN60950, UL60950,

CSA C22.2 No. 950 per cUL,

UL60950