Twisted Pair Testing

The IW-1000 provides a suite of twisted pair measurements to ensure the correct

connections and wiring of POTS and Ethernet cables.

Twisted Pair Wire Mapping

The Twisted Pair Wire Map provides details about the cable length, distance to

opens and shorts, skew, and the connection mapping of each wire when used with

the SmartRemote. This information lets technicians quickly locate improper wire

connections and the presence of physical layer issues. The IW-1000 can map

twisted pairs on Ethernet, Cat5/6, or phone wiring, straight, or Cat3.

Loop Length

The Loop Length test is an open capacitance test that calculates the length of the

twisted pair cable. Intended more for lengthy twisted pair runs the Loop Length

test lets technicians easily verify cable run lengths.

Butt-Set

The IW-1000 has a built-in butt-set with speaker phone that helps technicians

quickly verify voice communications and troubleshoot POTS issues. The results

indicate voltage and current on the line as well as the number dialed and the

status of the POTS line. Technicians can store a list of frequently called numbers

for easy dialing. The butt-set provides call waiting and displays the caller ID for

incoming calls. The speaker phone lets technicians listen for dial tone or voice and

talk during calls without a separate headset.

3

SMARTCLASS IW-1000

Twisted Pair Wire Map helps technicians find impair-

ments and incorrect wiring in phone and Ethernet

cables

Loop Length test measures the length of unterminat-

ed twisted pair cables

The built-in butt-set allows techs to verify and

troubleshoot POTS voice issues