SN54LVT244B, SN74LVT244B

3.3-V ABT OCTAL BUFFERS/DRIVERS

WITH 3-STATE OUTPUTS

SCAS354F – FEBRUARY 1994 – REVISED APRIL 2000

3

POST OFFICE BOX 655303

–0.5 V to 4.6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high-impedance

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . .

96 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SN74LVT244B

128 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48 mA

. . . . . . . . . . . . . . . . . . . . . . .

SN74LVT244B

64 mA

. . . . . . . . . . . . . . . . . . . . . . .

–50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

70

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DW package

58

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package

83

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

2. This current flows only when the output is in the high state and VO > VCC.

3. The package thermal impedance is calculated in accordance with JESD 51.

recommended operating conditions (see Note 4)

SN54LVT244B

SN74LVT244B

UNIT

MIN

MAX

MIN

MAX

UNIT

VCC

Supply voltage

2.7

3.6

2.7

3.6

V

VIH

High-level input voltage

2

2

V

VIL

Low-level input voltage

0.8

0.8

V

VI

Input voltage

5.5

5.5

V

IOH

High-level output current

–24

–32

mA

IOL

Low-level output current

48

64

mA

∆t/∆v

Input transition rise or fall rate

Outputs enabled

10

10

ns/V

∆t/∆VCC

Power-up ramp rate

200

200

µs/V

TA

Operating free-air temperature

–55

125

–40

85

°C

NOTE 4: All unused inputs of the device must at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications

of Slow or Floating CMOS Inputs, literature number SCBA004.

PRODUCT PREVIEW information concerns products in the formative or

design phase of development. Characteristic data and other

specifications are design goals. Texas Instruments reserves the right to

change or discontinue these products without notice.