Manual Ribbon Cable

Standard Press and

Tool Kit for SL™

n

Adjustable for 2 to 25 circuits, which provides for

production flexibility

n

Tooling Termination Kit easily mounted in the Molex

Manual Standard Press and can be quickly removed which

will increase productivity and reduce change over time

n

Full-cycle ratch assures quality terminations

n

Adjustable cable guides and stop for repeatable cable/

connector alignment for various cable size requirements

which lower overall cost through reduced tooling inventory

n

No air or electricity required which reduce overhead cost

n

Bench mounted operation that requires minimal space

n

Molex Manual Standard Press accepts many Molex tooling

kits for various Molex products that provide flexibility in

the changing marketplace and reduces overall cost

Mechanical

Dimensions: With Press and Tool Kit

Height—533.00mm (21.000”)

Width—152.00mm (6.000”)

Depth—408.00mm (16.100”)

Weight—27.2kg (60 lb)

Tool Kit Only:

Height—51.00mm (2.000”)

Width—127.00mm (5.000”)

Depth—178.00mm (7.000”)

Weight—2.5kg (5.5 lb)

Features and Benefits

The Molex SL Ribbon Cable Terminator Kit is designed to be used in the Molex Manual Standard Press. This tool system

terminates the SL IDT (Insulation Displacement Technology) 70400 and 70475 connectors onto pre-notched ribbon cable.

This tool system provides an effective and flexible method of termination. The Molex Manual Press has a full-cycle ratchet arm

which assures the quality of the termination. This tool system will also accommodate 2 to 25 circuits which provides flexibility. It

also features adjustable cable guides and stop for repeatable cable and connector alignment.

Operation: The operator loads a connector into the nest of the terminator kit (which is installed in the Molex Manual Standard

Press), sets the cable stop and positions the cable over the terminals. The operator cycles the ratch arm on the press to complete

the termination and then removes the harness. The terminals must be pushed into the housing by hand and then the carrier

strip must be broken off by hand. The operation is complete.

The product rate of this tool system is approximately 150 assemblies per hour depending on operator skill and application.

FEATURES AND SPECIFICATIONS

Americas Headquarters

Lisle, Illinois 60532 U.S.A.

1-800-78MOLEX

amerinfo@molex.com

Far East North Headquarters

Yamato, Kanagawa, Japan

81-462-65-2324

feninfo@molex.com

Far East South Headquarters

Jurong, Singapore

65-6-268-6868

fesinfo@molex.com

European Headquarters

Munich, Germany

49-89-413092-0

eurinfo@molex.com

Corporate Headquarters

2222 Wellington Ct.

Lisle, IL 60532 U.S.A.

630-969-4550

Fax:630-969-1352

Visit our website at www.molex.com

Order No. DHL-0011

Printed in USA/100/JI/JI/2006.05

©2006, Molex

ORDERING INFORMATION

Order No.

Description

62201-6600

Tool Kit Only

11-31-6356

Molex Manual Standard Press

MANUAL STANDARD

PRESS

CABLE STOP

CABLE GUIDES

LOWER TOOLING

UPPER

TOOLING

RATCHET ARM

62201-6600