Electronic Components Datasheet Search |
|
ASM5P23S09AG-1-16-SR Datasheet(PDF) 1 Page - PulseCore Semiconductor |
|
ASM5P23S09AG-1-16-SR Datasheet(HTML) 1 Page - PulseCore Semiconductor |
1 / 18 page ASM5P23S05A November 2006 ASM5P23S09A rev 1.5 Notice: The information in this document is subject to change without notice. PulseCore Semiconductor Corporation 1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018 www.pulsecoresemi.com REF PLL CLKOUT ASM5P23S05A 3.3V ‘SpreadTrak’ Zero Delay Buffer General Features • 15MHz to 133MHz operating range, compatible with CPU and PCI bus frequencies. • Zero input - output propagation delay. • Multiple low-skew outputs. • Output-output skew less than 250pS. • Device-device skew less than 700pS. • One input drives 9 outputs, grouped as 4+4+1 (ASM5P23S09A). • One input drives 5 outputs (ASM5P23S05A). • Less than 200pS cycle-to-cycle jitter is compatible with Pentium ® based systems. • Test Mode to bypass PLL (ASM5P23S09A only, refer Select Input Decoding Table). • Available in 16-pin, 150-mil SOIC and 4.4 mm TSSOP packages for ASM5P23S09A and in 8-pin, 150-mil SOIC and 4.4 mm TSSOP packages for ASM5P23S05A. • 3.3V operation • Advanced 0.35µ CMOS technology. • ‘SpreadTrak’. Functional Description ASM5P23S09A is a versatile, 3.3V zero-delay buffer designed to distribute high-speed clocks with Spread Spectrum capability. It is available in a 16-pin package. The ASM5P23S05A is the eight-pin version of the ASM5P23S09A. It accepts one reference input and drives out five low-skew clocks. The -1H version of the ASM5P23SXXA operates at up to 133MHz frequency, and has higher drive than the -1 device. All parts have on-chip PLLs that lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The ASM5P23S09A has two banks of four outputs each, which can be controlled by the Select inputs as shown in the Select Input Decoding Table. If all the output clocks are not required, Bank B can be three-stated. The select input also allows the input clock to be directly applied to the outputs for chip and system testing purposes. Multiple ASM5P23S09A and ASM5P23S05A devices can accept the same input clock and distribute it. In this case the skew between the outputs of the two devices is guaranteed to be less than 700pS. All outputs have less than 200 pS of cycle-to-cycle jitter. The input and output propagation delay is guaranteed to be less than 350 pS, and the output to output skew is guaranteed to be less than 250 pS. The ASM5P23S09A and the ASM5P23S05A are available in two different configurations, as shown in the ordering information table. The ASM5P23SXXA-1 is the base part. The ASM5P23SXXA-1H is the high drive version of the -1 part and its rise and fall times are much faster than -1 part. Block Diagram CLKA1 CLKA2 CLKA3 CLKA4 CLKB1 CLKB2 CLKB3 CLKB4 CLKOUT S1 S2 Select Input MUX ASM5P23S09A Decoding PLL REF CLK1 CLK2 CLK3 CLK4 |
Similar Part No. - ASM5P23S09AG-1-16-SR |
|
Similar Description - ASM5P23S09AG-1-16-SR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |