Electronic Components Datasheet Search |
|
M13S32321A-5L Datasheet(PDF) 4 Page - Elite Semiconductor Memory Technology Inc. |
|
M13S32321A-5L Datasheet(HTML) 4 Page - Elite Semiconductor Memory Technology Inc. |
4 / 50 page ESMT M13S32321A Elite Semiconductor Memory Technology Inc. Publication Date : Jul. 2008 Revision : 1.1 4/50 Absolute Maximum Rating Parameter Symbol Value Unit Voltage on any pin relative to VSS VIN, VOUT -0.5 ~ 3.6 V Voltage on VDD supply relative to VSS VDD, VDDQ -1.0 ~ 3.6 V Voltage on VDDQ supply relative to VSS VDDQ -0.5 ~ 3.6 V Storage temperature TSTG -55 ~ +150 C ° Power dissipation PD 1.0 W Short circuit current IOS 50 mA Note : Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to recommend operation condition. Exposure to higher than recommended voltage for extended periods of time could affect device reliability. DC Operation Condition & Specifications DC Operation Condition Recommended operating conditions (Voltage reference to VSS = 0V, TA = 0 to 70 C °) Parameter Symbol Min Max Unit Note Supply voltage VDD 2.375 2.625 V I/O Supply voltage VDDQ 2.375 2.625 V I/O Reference voltage VREF 0.49*VDDQ 0.51*VDDQ V 1 I/O Termination voltage (system) VTT VREF - 0.04 VREF + 0.04 V 2 Input logic high voltage VIH (DC) VREF + 0.15 VDDQ + 0.3 V Input logic low voltage VIL (DC) -0.3 VREF - 0.15 V Input Voltage Level, CLK and CLK inputs VIN (DC) -0.3 VDDQ + 0.3 V Input Differential Voltage, CLK and CLK inputs VID (DC) 0.36 VDDQ + 0.6 V Input leakage current II -2 2 μ A 3 Output leakage current IOZ -5 5 μ A Output High Current (Normal strength driver) (VOUT =VDDQ-0.373V, min VREF, min VTT) IOH -16.8 mA Output Low Current (Normal strength driver) (VOUT = 0.373V) IOL +16.8 mA Output High Current (Weak strength driver) (VOUT =VDDQ-0.763V, min VREF, min VTT) IOH -9 mA Output Low Current (Weak strength driver) (VOUT = 0.763V) IOL +9 mA Notes 1. VREF is expected to be equal to 0.5* VDDQ of the transmitting device, and to track variations in the DC level of the same. Peak-to-peak noise on VREF may not exceed 2% of the DC value. 2. VTT is not applied directly to the device. VTT is system supply for signal termination resistors, is expected to be set equal to VREF, and must track variations in the DC level of VREF . 3. VID is the magnitude of the difference between the input level on CLK and the input level on CLK . |
Similar Part No. - M13S32321A-5L |
|
Similar Description - M13S32321A-5L |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |