-51-

H HiTRON

UNIVERSAL AC INPUT HARMONIC CORRECTION

AC-DC 19" COMPATIBLE EUROCARD MULTI-OUTPUT

100 WATTS SWITCHING MODE POWER SUPPLIES HPU100 SERIES

FEATURES:

ACCOMMODATE UNIVERSAL AC SOURCES

MEET IEC 61000-3-2 HARMONIC CORRECTION

MEET UNIVERSAL SAFETY STANDARDS

19” COMPATIBLE EUROCARD FORMAT

EMI MEET EN 55022 & FCC CLASS B

CE MARKING COMPLIANCE

3U X 10HP X 160MM VMEbus STANDARD

GENERAL SPECIFICATION

Efficiency: Typ. 73-76%.

Switching Frequency: Fixed frequency 83K Hz.

Circuit Topology: Fixed frequency forward circuit.

Transient Response: Output voltage returns

in less than 3mS following

a 25% load change.

Safety Standard: IEC 60950-1/UL 60950-1 Class I.

Power Density: 2.0 Watt / Cubic Inch.

Operating Temperature: 0 to +50°C full load. Derates

from +50 to +70°C by derating 2%/°C.

Storage Temperature: -25 to +85°C.

Temperature Coefficient: Typ. 0.04% /°C.

Cooling: Forced air flow is recommended for Ta > +50°C

full load operation.

Construction format: 10HP(TE) X3UX160mm VMEbus

standard Eurocard format.

Note: Due to requests in market and advances in technology, specifications subject to change without notification.

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: Typ. 90-264Vac with PFC.

Input Connector: DIN 41612 at rear.

Input Frequency: 47-63Hz.

Inrush Current: Typ. <30.6A @ 230Vac.

Input Current: 1.0A @ 115Vac, 0.5A @ 230Vac.

Dielectric Withstand: Meet IEC 60950-1.

EMI: Meet EN 55022 & FCC B.

Power Factor Correction: Meet Harmonic Correction

IEC 61000-3-2 .PF typ. 0.97-0.98.

Power Indicator: Green LED.

Power OK Signal: Installed.

Logic Inhibit: Installed.

Hold-up Time: 20mS @ 115Vac & 230Vac.

Earth Leakage: Less than 0.40mA @ 230Vac.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Connector: DIN 41612 at rear.

Line Regulation: Typ. 0.5%.

Load Regulation: Main VO1 typ. ±1-2.0%.

Aux.VO2 typ. ±2.0% (Mag. Amp.)

Aux.VO3 typ. ±3.0% (PR).

Noise & Ripple: Typ. 1% peak to peak.

OVP: Built-in at main VO1.

Adjustability: Available at VO1 & VO2.

Overload Protection (OLP): Fully protected against

output overload and short circuit.

Consult the factory for OLP setting.

In application

RSG

ELECTRONIC COMPONENTS

www.rsg-electronic.de

Änderungen vorbehalten / subject to change without notice

■