Electronic Components Datasheet Search |
|
P6KE9.1E3 Datasheet(PDF) 1 Page - Microsemi Corporation |
|
P6KE9.1E3 Datasheet(HTML) 1 Page - Microsemi Corporation |
1 / 4 page 600 Watt TRANSIENT VOLTAGE SUPPRESSOR Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 Copyright © 2007 6-20-2007 REV G S C O T TS DALE DIVISION P6KE6.8 thru 200CA, e3 DESCRIPTION APPEARANCE This P6KE series is an economical 600 W Transient Voltage Suppressor (TVS) for protecting voltage-sensitive components from destruction or degradation. It is available in both unidirectional and bi-directional configurations as well as RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part number. The response time of their clamping action is virtually instantaneous. As a result, they may also be used effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4 or for inductive switching environments and induced RF. They can also be used for protecting other sensitive components from secondary lightning effects per IEC61000-4-5 and class levels defined herein. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com T-18 FEATURES APPLICATIONS / BENEFITS • Available in both unidirectional and bidirectional (add C or CA suffix to part number for bidirectional) • Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55 oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in the operating direction for unidirectional or both directions for bidirectional) • Options for screening in accordance with MIL-PRF- 19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers. • Surface mount equivalents available as SMBJP6KE6.8 to SMBJP6KE200CA or SMBJ5.0 to SMBJ170CA (consult factory for other surface mount options) • Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B • RoHS Compliant devices available by adding “e3” suffix • Selections for 6.8 to 200 volts breakdown (VBR) • Economical TVS series for thru-hole mounting • Protects sensitive components such as IC’s, CMOS, Bipolar, BiCMOS, ECL, DTL, T 2L, etc. • Protection from switching transients & induced RF • Compliant to IEC61000-4-2 and IEC61000-4-4 for ESD and EFT protection respectively • Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1: P6KE6.8 to P6KE130A or CA Class 2: P6KE6.8 to P6KE68A or CA Class 3: P6KE6.8 to P6KE36A or CA Class 4: P6KE6.8 to P6KE18A or CA • Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1: P6KE6.8 to P6KE43A or CA Class 2: P6KE6.8 to P6KE22A or CA MAXIMUM RATINGS MECHANICAL AND PACKAGING • Peak Pulse Power dissipation at 25oC: 600 watts at 10/1000 μs (also see Fig 1,2, and 3). • Impulse repetition rate (duty factor): 0.01% • tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional • Operating and Storage temperature: -65oC to +150oC • Thermal Resistance: 25 oC/W at 3/8 inch (10 mm) lead length from body, or 85 °C/W junction to ambient when mounted on FR4 PC board with 4 mm 2 copper pads (1 oz) and track width 1 mm, length 25 mm • Steady-State Power: 5 watts @ TL=25oC 3/8 inch (10 mm) from body, or 1.47 W when mounted on FR4 PC board described for thermal resistance • Forward Voltage at 25oC: 3.5 Volts maximum @ 100 Amp peak impulse of 8.3 ms half-sine wave (unidirectional only) • Solder temperatures: 260oC for 10 s (maximum) • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 • FINISH: Tin-Lead or RoHS Compliant annealed matte-Tin plating readily solderable per MIL-STD- 750, method 2026 • MARKING: Body marked with part number • POLARITY: Band denotes cathode. Bidirectional not marked • WEIGHT: 0.7 grams (approximate) • TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number) • See package dimensions on last page |
Similar Part No. - P6KE9.1E3 |
|
Similar Description - P6KE9.1E3 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |