Electronic Components Datasheet Search |
|
TCPWCH05H05MTR102 Datasheet(PDF) 5 Page - Token Electronics Industry Co., Ltd. |
|
TCPWCH05H05MTR102 Datasheet(HTML) 5 Page - Token Electronics Industry Co., Ltd. |
5 / 6 page 05 of 06 Environmental Characteristics Version 2010 The force for tearing off cover tape is 0.05 ~ 0.69(N) in the arrow direction at the following conditions: Temperature: 5 ~ 35°C. Humidity: 45 ~ 85%. Atmospheric pressure: 860 ~ 1060 hpa. Test Items Specifications Test Conditions / Test Methods Electrical Performance Test Impedance Refer to standard electrical characteristic spec. LCR Meter HP 4291B DC Resistance (RDC) Micro-Ohm meter (GOM-801G) Withstand Voltage (VDC) Component should not be damaged Test Voltage: 2.5 Times Rated Voltage; Testing Time: 60 sec. Charge Current: 0.5mA Rated Voltage (VDC) Test Voltage: Rated Voltage; Testing Time: 1 to 5 sec; Charge Current: 1mA Insulation Resistance (I.R.) Charge Current: 1 minute 10M ohm min Mechanical Performance Test Component Adhesion (push Test) Base: 0805 ≥ 2 Lbs Cover: 0805 ≥ 1 Lbs Base: 1206 ≥ 4 Lbs Cover: 1206 ≥ 2 Lbs The component should be soldered (232°C±5°C for 10 sec.) totinned copper substrate. Applied force gauge to the side of component It must withstand force of 2 or 4 pounds without failure of the component. Drop Test Component should not be damaged Dropping chip by each side and corner; Drop 10 times in total Drop height:100cm; Drop weight:125g Solderability Test The terminal should at least be 90% covered with solder The component shall be dipped in a melted solder bath at 235°C±5°C for 5 seconds. Vibration Test (Low Frequency) Component should not be damaged 1. Amplitude: 1.5 m/m; 2. Frequency: 10-55-10 Hz(1min); 3. Direction: X, Y, Z; 4. Duration: 2 Hrs/X, Y, Z. Climatic Test Low Temperature Storage Test Impedance change: Within±20% Without distinct damage in ppearance. 1. Temp: -40°C±C2°C; 2. Time: 1000±48 Hours; 3. Component should be tested after 1 hour at room temperature. Thermal Shock Test Total: 5 Cycles High Temperature Storage Test 1. Temp: 85°C±2°C; 2. Time: 1000±48 Hours; 3. Component should be tested after 1 hour at room temperature. Humidity Test 1. Temp: 40°C±2°C; 2. R.H.: 90%~95%; 3. Time: 48±2 Hours High Temperature Load Life Test There should be no evidence of short or open circuit 1. Temp: 85°C±2°C; 2. Time: 96±12 Hours; 3. Load: Allowed DC Current Low Temperature Load Life Test 1. Temp: -40°C±2°C; 2. Time: 96±12 Hours; 3. Load: Allowed DC Current Note: Storage Temperature: 25±3°C; Humidity:<80%RH ROOM TEMP 15MINS -25±2°C 30MINS ROOM TEMP 15MINS 30MINS -85±2°C TCPWC EMI Filters SMD Choke http://www.token.com.tw/ rfq token.com.tw TOKEN |
Similar Part No. - TCPWCH05H05MTR102 |
|
Similar Description - TCPWCH05H05MTR102 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |