Electronic Components Datasheet Search |
|
TLK1102ERGER Datasheet(PDF) 7 Page - Texas Instruments |
|
|
TLK1102ERGER Datasheet(HTML) 7 Page - Texas Instruments |
7 / 32 page ABSOLUTE MAXIMUM RATINGS RECOMMENDED OPERATING CONDITIONS DC ELECTRICAL CHARACTERISTICS AC ELECTRICAL CHARACTERISTICS TLK1102E www.ti.com ................................................................................................................................................................................................... SLLS958 – MARCH 2009 over operating free-air temperature range (unless otherwise noted) (1) VALUE UNIT VCC Supply voltage(2) -0.3 to 4.0 V VIN+, VIN- Voltage at INA+, INA-, INB+, INB-(2) 0.5 to 4.0 V VIO Voltage at pin 7 to 11 and pin 20 to 24(2) -0.3 to 4.0 V VIN,DIFF Differential voltage between INA+ and INA-, and between INB+ and INB- ±2.5 V IIN+, IIN- Continuous current at data inputs -25 to 25 mA IOUT+, IOUT- Continuous current at data outputs -35 to 35 mA ILOS Sink current at LOSA and LOSB outputs 25 mA ESD ESD rating at all pins 2.5 kV (HBM) TJ,max Maximum junction temperature 125 °C (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability. (2) All voltage values are with respect to network ground terminal. MIN NOM MAX UNIT VCC Supply voltage 2.95 3.3 3.6 V TA Operating lead temperature -40 100 °C VIH CMOS input high voltage 2.1 V VIL CMOS input low voltage 0.7 V over recommended operating conditions (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT VCC Supply voltage 2.95 3.3 3.6 V 600mVp-p SWG setting (CML output current included) 170 230 ICC Supply current mA 1200mVp-p SWG setting (CML output current included) 225 290 LOS high voltage ISOURCE = 50µA; 10kΩ Pull-up to VCC on LOSA or 2.4 V LOSB pin LOS low voltage ISINK = 10mA; 10kΩ Pull-up to VCC on LOSA or LOSB 0.4 V pin Typical operating condition is at VCC = 3.3V and TA = 25°C. Over recommended operating conditions (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Low frequency -3dB bandwidth With 0.1 µF input AC-coupling capacitors 30 50 kHz BER < 10-12 , K28.5 pattern at 11.3Gbps over a 10m 28AWG cable including two SMA connectors (27dB loss at 5.65GHz), VIN,MIN Data input sensitivity 250 mVp-p SWG = 600mVp-p setting, no de-emphasis, maximum interconnect length setting. Voltage measured at the input of the cable. BER < 10–12 , K28.5 pattern at 11.3Gbps, K28.5 pattern at 11.3Gbps over a 15m 24AWG cable including two SMA connectors (29dB loss at 5.65GHz), SWG = VIN,MAX Data input overload 1600 mVp-p 600mVp-p setting, no de-emphasis, maximum interconnect length setting. Voltage measured at the input of the cable. Copyright © 2009, Texas Instruments Incorporated Submit Documentation Feedback 7 Product Folder Link(s): TLK1102E |
Similar Part No. - TLK1102ERGER |
|
Similar Description - TLK1102ERGER |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |