OPA188

OPA2188

OPA4188

SBOS525

– AUGUST 2011

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

SPECIFIED

PACKAGE-

PACKAGE

TEMPERATURE

PACKAGE

ORDERING

TRANSPORT MEDIA,

PRODUCT

LEAD

DESIGNATOR

RANGE

MARKING

NUMBER

QUANTITY

SINGLE

OPA188AIDBVT

Tape and Reel, 250

SOT23-5

DBV

–40°C to +105°C

TBD

OPA188AIDBVR

Tape and Reel, 3000

OPA188AID

Rails, 100

SO-8

D

–40°C to +105°C

OPA188A

OPA188AIDR

Tape and Reel, 2500

OPA188AIDGKT

Tape and Reel, 250

MSOP-8

DGK

–40°C to +105°C

TBD

OPA188AIDGKR

Tape and Reel, 2500

DUAL

OPA2188AID

Rails, 100

SO-8

D

–40°C to +105°C

2188

OPA2188AIDR

Tape and Reel, 2500

OPA2188

OPA2188AIDGKT

Tape and Reel, 250

MSOP-8

DGK

–40°C to +105°C

2188

OPA2188AIDGKR

Tape and Reel, 2500

QUAD

OPA4188AID

Rails, 90

SO-14

D

–40°C to +105°C

OPA4188A

OPA4188AIDR

Tape and Reel, 2000

OPA4188AIPW

Rails, 90

TSSOP-14

PW

–40°C to +105°C

OPA4188A

OPA4188AIPWR

Tape and Reel, 2000

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the

device product folder at www.ti.com.

(2)

Product preview device.

ABSOLUTE MAXIMUM RATINGS

OPAx188

UNIT

Supply voltage

±20, 40 (single supply)

V

Voltage

(V

–) – 0.5 to (V+) + 0.5

V

Signal input terminals

±10

mA

Continuous

Operating temperature

–55 to +125

°C

Storage temperature

–65 to +150

°C

Junction temperature

+150

°C

Human body model (HBM)

1.5

kV

ESD ratings

Charged device model (CDM)

1

kV

(1)

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only and functional operation of the device at these or any other conditions beyond

those specified is not implied.

(2)

Short-circuit to ground, one amplifier per package.

2

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated

Product Folder Link(s): OPA188 OPA2188 OPA4188