Optoway

SPS-4381W-DXXG

***********************************************************************************************************************************************************************

***********************************************************************************************************************************************************************

Tel: 886-3-5979798

Fax: 886-3-5979737

E-mail: sales@optoway.com.tw

http: // www.optoway.com.tw

12/1/2010 V2.0

1

SPS-4381W-DXXG

(RoHS Compliant)

***********************************************************************************************************************************************************************

FEATURES

l Up to 8.5 Gbps Bi-directional Data Links

l Complaint to SFP+ MSA

l Compliance with Fibre Channel FC-PI-4 800-SM-LC-L

l Compliant with 4G and, 2G Fibre Channel

l Temperature-stabilized DWDM EML Transmitter

l 100 GHz ITU Grid, C Band

l Distance up to 80 km

l SFF-8472 Digital Diagnostic Function

l AC/AC Coupling according to MSA

l Single +3.3 V Power Supply

l RoHS 6/6 Compliant

l Class 1 Laser International Safety Standard IEC-60825

Compliant

APPLICATIONS

l Multi-rate 8x / 4x / 2x Fibre Channel

DESCRIPTION

The SPS-4381W-DXXG series single mode transceiver

is small form factor pluggable module for bi-directional

serial optical data communications such as 8x/4x/2x Fibre

Channel.

It is with the SFP 20-pin connector to allow hot plug

capability. Digital diagnostic functions are available via an

I

operates at a nominal wavelength of 100GHz ITU Grid, C

Band DWDM wavelength. A guaranteed minimum optical

link budget of 23 dB is offered. The transmitter section

consists

of

a

temperature-stabilized

DWDM

electrical-modulated laser (EML), driver and signal

conditioner. The receiver section uses an integrated InGaAs

detector preamplifier (IDP) mounted in an optical header

and a limiting post-amplifier IC.

LASER SAFETY

This single mode transceiver is a Class 1 laser product. It

complies with IEC-60825 and FDA 21 CFR 1040.10 and

1040.11.

The transceiver must be operated within the

specified temperature and voltage limits. The optical ports

of the module shall be terminated with an optical connector

or with a dust plug.