H

H–3

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ck-components.com

TDP Series

Ultra-miniature Surface Mount

Half-pitch Side-Actuated DIP Switches

Specifications

SWITCH FUNCTION: SPST — 2, 4, 6, 8, 10 positions.

CONTACT RATING:

24 V DC, 25 mA (switching).

50 V DC, 100 mA (steady state).

MECHANICAL AND ELECTRICAL LIFE: 1,000 cycles.

CONTACT RESISTANCE: 100 m

Ω max.

INSULATION RESISTANCE: 100 M

Ω @ 100 V DC min.

DIELECTRIC STRENGTH: 300 V AC min.

STORAGE TEMPERATURE: –40°C to 85°C.

OPERATING TEMPERATURE: –40°C to 85°C.

OPERATING FORCE: 4,9N max.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

PACKAGING: Switches supplied in rigid dispensing tubes in full tube

quantities only, this may affect order quantity. Tape and reel

packaging also available.

Features/Benefits

side-actuated DIP

on/off position in horizontal applications

and washable processing

Typical Applications

electronic devices

Materials

CASE & COVER: glass filled PPS (UL94V-0).

ACTUATOR: PA6T (UL94V-0).

CONTACTS: Copper alloy with gold plate over nickel plate.

TERMINALS: Copper alloy, with gold over nickel plate.

All terminals are insert molded.

TAPE SEAL: Polyimide.

Note: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Designation

TDP

Number

of Positions

02

04

06

08

10

Actuator

Terminals

Contact Material

Tape Seal

Terminal Seal

Packaging

TD P

B

S

1

Note: Tape seal is not available with H1 Extended Actuators.

How To Order

Our easy Build-A Switch concept allows you to mix and match options to create the switch you need. Below is a complete

listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box.

All switches supplied in “OFF” position.