bq24100, bq24103, bq24103A

bq24104, bq24105, bq24108, bq24109

bq24113, bq24113A, bq24115

SLUS606O – JUNE 2004 – REVISED MARCH 2010

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

CHARGE REGULATION VOLTAGE (V)

INTENDED APPLICATION

MARKINGS

bq24100RHLR

CIA

4.2 V

Stand-alone

bq24100RHLT

CIA

bq24103RHLR

CID

1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)

Stand-alone

bq24103RHLT

CID

bq24103ARHLR

CKO

1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)

Stand-alone

bq24103ARHLT

CKO

bq24104RHLR

NXW

1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)

Stand-alone

(Blinking status pins)

bq24104RHLT

NXW

bq24105RHLR

CIF

–40°C to 125°C

Externally programmable (2.1 V to 15.5 V)

Stand-alone

bq24105RHLT

CIF

bq24108RHLR

CIU

4.2 V (Blinking status pins)

Stand-alone

bq24109RHLR

CDY

bq24113RHLR

CIJ

1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)

System-controlled

bq24113RHLT

CIJ

bq24113ARHLR

CKF

1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)

System-controlled

bq24113ARHLT

CKF

bq24115RHLR

CIL

Externally programmable (2.1 V to 15.5 V)

System-controlled

bq24115RHLT

CIL

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

Web site at www.ti.com.

(2)

The RHL package is available in the following options:

T – taped and reeled in quantities of 250 devices per reel

R – taped and reeled in quantities of 3000 devices per reel

(3)

This product is RoHS-compatible, including a lead concentration that does not exceed 0.1% of total product weight, and is suitable for

use in specified lead-free soldering processes.

ABSOLUTE MAXIMUM RATINGS

(1)

over operating free-air temperature range (unless otherwise noted)

UNIT

IN, VCC

20 V

STAT1, STAT2, PG, CE, CELLS, SNS, BAT

–0.3 V to 20 V

OUT

–0.7 V to 20 V

7 V

VTSB

3.6 V

ISET1, ISET2

3.3 V

±1 V

Output sink

STAT1, STAT2, PG

10 mA

Output current (average)

OUT

2.2 A

Operating free-air temperature range

–40°C to 85°C

Junction temperature range

–40°C to 125°C

Storage temperature

–65°C to 150°C

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

300°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

2

Submit Documentation Feedback

Copyright © 2004–2010, Texas Instruments Incorporated

Product Folder Link(s): bq24100 bq24103 bq24103A bq24104 bq24105 bq24108 bq24109 bq24113 bq24113A

bq24115