ADS1000-Q1

SBAS480A – SEPTEMBER 2009 – REVISED AUGUST 2010

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

ORDERABLE PART NUMBER

TOP-SIDE MARKING

ADS1000A0QDBVRQ1

BSKQ

–40°C to 125°C

SOT-23 – DBV

Reel of 3000

ADS1000A1QDBVRQ1

BTMQ

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2)

Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

ABSOLUTE MAXIMUM RATINGS

(1)

Over operating free-air temperature range (unless otherwise noted).

ADS1000

UNIT

–0.3 to 6

V

Input current (momentary)

100

mA

Input current (continuous)

10

mA

V

Voltage to GND, SDA, SCL

–0.5 to 6

V

+150

°C

Operating temperature

–40 to 125

°C

Storage temperature

–60 to 150

°C

(1)

Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute

maximum conditions for extended periods may affect device reliability.

2

Submit Documentation Feedback

Copyright © 2009–2010, Texas Instruments Incorporated

Product Folder Link(s): ADS1000-Q1