12

wound0103_reli-PRP5

wound0103_reli_e-01

＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

20.High temperature life test

LB, LBC, LBR, LBMF Series

CB, CBC, CBL, CBMF Series

Inductance change:Within±10％

No significant abnormality in appearance.

LBM Series

LEM Series

Inductance change :Within±10％

Q→ R12～4R7：30 min.

5R6～330：25 min.

390～820：20 min.

101：15 min.

【Test Methods and Remarks】

Temperature：85±2℃

Duration：1000 hrs

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

LEM：Recovery

At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

21.Loading at high temperature life test

LB, LBC, LBR, LBMF Series

Inductance change:Within±10％

No significant abnormality in appearance.

CB, CBC, CBL, CBMF Series

LBM, LEM Series

【Test Methods and Remarks】

Temperature：85±2℃

Duration：1000 hrs

Applied current：Rated current

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

22.Low temperature life test

LB, LBC, LBR, LBMF Series

Inductance change:Within±10％

No significant abnormality in appearance.

CB, CBC, CBL, CBMF Series

LBM Series

LEM Series

Inductance change :Within±10％

Q→ R12～4R7：30 min.

5R6～330：25 min.

390～820：20 min.

101：15 min.

【Test Methods and Remarks】

Temperature：－40±2℃

Duration：1000 hrs

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

LEM：Recovery

At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

23.Standard condition

LB, LBC, LBR, LBMF Series

Standard test conditions

Unless specified, Ambient temperature is 20±15℃ and the Relative humidity is 65±

20％. If there is any doubt about the test results, further measurement shall be had

within the following limits:

Ambient Temperature: 20±2℃

Relative humidity: 65±5％

Inductance value is based on our standard measurement systems.

CB, CBC, CBL, CBMF Series

LBM, LEM Series