OUT

GND

IN

EN

4

1

3

2

Thermal

Pad

TLV707 Series

www.ti.com

SBVS153B

– FEBRUARY 2011 – REVISED OCTOBER 2011

PIN CONFIGURATIONS

DQN PACKAGE

DFN-4

(TOP VIEW)

PIN DESCRIPTIONS

PIN

NAME

NO.

DESCRIPTION

Regulated output voltage pin. A small 1

μF ceramic capacitor is needed from this pin to ground to assure

OUT

1

stability. See Input and Output Capacitor Requirements in the Application Information section for more

details.

GND

2

Ground pin

Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator into

EN

3

shutdown mode

For TLV707xxP, output voltage is discharged through an internal 120-

Ω resistor when device is shut down.

Input pin. A small 1

µF ceramic capacitor is recommended from this pin to ground for good transient

IN

4

performance. See Input and Output Capacitor Requirements in the Application Information section for more

details.

NC

—

No connection. This pin can be tied to ground to improve thermal dissipation.

Copyright

© 2011, Texas Instruments Incorporated

Submit Documentation Feedback

5