SN74AHC245-EP

OCTAL BUS TRANSCEIVER

WITH 3-STATE OUTPUTS

SCLS487A – MAY 2003 – REVISED JUNE 2003

3

POST OFFICE BOX 655303

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±25 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±75 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

58

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package

83

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. The package thermal impedance is calculated in accordance with JESD 51-7.

recommended operating conditions (see Note 3)

MIN

MAX

UNIT

VCC

Supply voltage

2

5.5

V

VCC = 2 V

1.5

VIH

High-level input voltage

VCC = 3 V

2.1

V

VCC = 5.5 V

3.85

VCC = 2 V

0.5

VIL

Low-level input voltage

VCC = 3 V

0.9

V

VCC = 5.5 V

1.65

VI

Input voltage

OE or DIR

0

5.5

V

VO

Output voltage

A or B

0

VCC

V

VCC = 2 V

–50

mA

IOH

High-level output current

VCC = 3.3 V ± 0.3 V

–4

mA

VCC = 5 V ± 0.5 V

–8

mA

VCC = 2 V

50

mA

IOL

Low-level output current

VCC = 3.3 V ± 0.3 V

4

mA

VCC = 5 V ± 0.5 V

8

mA

∆t/∆v Input transition rise or fall rate

VCC = 3.3 V ± 0.3 V

100

ns/V

∆t/∆v Input transition rise or fall rate

VCC = 5 V ± 0.5 V

20

ns/V

TA

Operating free-air temperature

–55

125

°C

NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.