CR0603-16W-105JT datasheet(3/38 Pages) ATMEL

Part #	CR0603-16W-105JT

Description	AT90USB1287 (AVR) 64 QFN device (2.7V < VCC < 5.5V)

Download	38 Pages

Scroll/Zoom	100%

Manufacturer	ATMEL [ATMEL Corporation]

Direct Link	http://www.atmel.com

Logo

3 / 38 page

Section 1

Introduction

Congratulations on acquiring the AVR®-based AT88CK109BSTK3 CryptoAuthentication Starter

Kit. This kit is designed to give designers a quick start to develop code for the CryptoAuthentication

product family. All the necessary hardware is provided in the package. The AT88Microbase has

been pre-programmed for your convenience. Please be sure to visit WWW.Atmel.com/Javan for

the latest firmware image.

1.1

Overview

This document describes the AT88CK109STK3, which is a development kit for the AT88SA100,

AT88SA102, and ATSA8810HS CryptoAuthentication devices. This kit uses a modular approach.

The

development

kit

includes

the

AT88Microbase

board

and

the

AT88CK109BK3

CryptoAuthentication daughter board.

The AT88Microbase uses a convenient Type-A USB

interface allowing users to interface with a personal computer and experiment with

CryptoAuthentication. The small USB form factor of the AT88Microbase allows the board to

function as a demo as well as a development platform.

The AT88CK109BK3 daughter board has two SOT23-3 sockets for either client-host or multiple

client development. Together, these boards allow an easy evaluation of the CryptoAuthentication

products using demonstration software. This user guide acts as a general, getting started guide as

well as a complete technical reference for advanced users.

1.2

AT88CK109STK3 Starter Kit Features

AT88Microbase provides the following features:



AT90USB1287 (AVR) 64 QFN device (2.7V < VCC < 5.5V)

– 128K Bytes of In-System Self-Programmable Flash

– 4K Bytes EEPROM

– 8K Bytes Internal SRAM



AT88SC018 CryptoCompanion IC



USB software interface for Device Firmware Upgrade (DFU boot loader)

(2)



Power supply LED

– from the USB interface (USB device bus powered application)

– from an external power supply



JTAG Connector:

– for on-chip ISP

– for on-chip debugging using JTAG ICE

Similar Part No. - CR0603-16W-105JT

Manufacturer	Part #	Datasheet	Description
Silicon Laboratories	CR0603-16W-1004F	684Kb / 36P	Evaluation Board Rev 5.0 for the Si2493/57/34/15/04
Silicon Laboratories	CR0603-16W-104J	684Kb / 36P	Evaluation Board Rev 5.0 for the Si2493/57/34/15/04

More results

Similar Description - CR0603-16W-105JT

Manufacturer	Part #	Datasheet	Description
ATMEL Corporation	STK525	889Kb / 39P	AT90USBxxx TQFP device (2.7V
ATMEL Corporation	STK526	1Mb / 40P	AT90USB82/162 TQFP device (2.7V
Intersil Corporation	ISL4241E	266Kb / 14P	QFN Packaged, 짹15kV ESD Protected, 2.7V to 5.5V, 10Nanoamp, 250kbps, 2.7V to 5.5V, 10Nanoamp, 250kbps,
	ISL3232E	281Kb / 14P	QFN Packaged, 짹15kV ESD Protected, 2.7V to 5.5V, 150nA, 250kbps, RS-232 2.7V to 5.5V, 150nA, 250kbps, RS-232
	ISL3232EIRZ	279Kb / 14P	QFN Packaged, ±15kV ESD Protected, 2.7V to 5.5V, 150nA, 250kbps, RS-232 Transmitters/Receivers May 13, 2010
	ISL4221E	415Kb / 13P	QFN Packaged, 짹15kV ESD Protected, 2.7V to 5.5V, 150nA, 250kBps, RS-232 Transmitters/Receivers
Renesas Technology Corp	ISL4241E	684Kb / 14P	QFN Packaged, 짹15kV ESD Protected, 2.7V to 5.5V, 10Nanoamp, 250kbps, RS-232 Transmitters/Receivers
Renesas Technology Corp	ISL3232E	661Kb / 14P	QFN Packaged, 짹15kV ESD Protected, 2.7V to 5.5V, 150nA, 250kbps, RS-232 Transmitters/Receivers
Intersil Corporation	ISL4221E	401Kb / 13P	QFN Packaged, /-15kV ESD Protected, 2.7V to 5.5V, 150Nanoamp, 250kBps, RS-232 Transmitters/Receivers
EHAOAN.	HS538	1Mb / 8P	2.7V or 5.5V supply voltage

More results

CR0603-16W-105JT Datasheet(PDF) 3 Page - ATMEL Corporation

CR0603-16W-105JT Datasheet(HTML) 3 Page - ATMEL Corporation

Similar Part No. - CR0603-16W-105JT

Similar Description - CR0603-16W-105JT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Datasheet Download

Link URL