TC7LX1102FK

4

7.

7.

7.

7. Internal Equivalent Circuit

Internal Equivalent Circuit

Internal Equivalent Circuit

Internal Equivalent Circuit

The TC7LX1102FK does not have a control signal that controls the direction of data flow between A and B. In a

DC state, the output circuit holds either High or Low level, but since it is designed to have a weak drive strength

(with a typical output resistance of 5.5 kΩ), an overdrive signal from the external driver can change the direction

of data flow.

The output one-shot circuits detect either a rising or falling edge on the A or B port. During the rise time, the

output one-shot circuit associated with the PMOS transistors turns it on for a certain period to speed up a

transition from Low to High. Likewise, during the fall time, the output one-shot circuit associated with the NMOS

transistors turns it on to speed up a transition from High to Low.

Fig.

Fig.

Fig.

Fig. 7.1

7.1

7.1

7.1 Internal Equivalent Circuit

Internal Equivalent Circuit

Internal Equivalent Circuit

Internal Equivalent Circuit

8.

8.

8.

8. Principle of Operation

Principle of Operation

Principle of Operation

Principle of Operation

8.1.

8.1.

8.1.

8.1. Truth Table

Truth Table

Truth Table

Truth Table

Input

OE

H

L

Function

A port = B port

Disconnect

2011-06-16

Rev.2.0