2

AN33016UA

Ver. AEB

ABSOLUTE MAXIMUM RATINGS

*1

Notes

0.481 W

0.925 W

135.1

°C / W

24 Pin Plastic Shrink Small Outline Package

(SSOP Type)

PD ( Ta = 85

°C)

PD ( Ta = 25

°C)

θ

JA

PACKAGE

POWER DISSIPATION RATING

Note). For the actual usage, please refer to the PD-Ta characteristics diagram in the package specification, follow the power supply

voltage, load and ambient temperature conditions to ensure that there is enough margin and the thermal design does not

exceed the allowable value.

*1:Glass Epoxy Substrate(4 Layers) [Glass-Epoxy: 50 X 50 X 0.8t(mm)]

CAUTION

Although this has limited built-in ESD protection circuit, but permanent damage may occur on it.

Therefore, proper ESD precautions are recommended to avoid electrostatic damage to the MOS gates

*1

V

-0.3 to 5.5

FLAG

Output Voltage Range

*1

*5

V

– 0.3 to ( Vcc + 0.3 )

LX1,LX2

*1

*4

V

-0.3 to (Vcc+VREG)

BT

Input Voltage Range

*1

*3

V

(Vcc-5.5) to (Vcc+0.3)

VCC_S,RS

Input Voltage Range

*1

*5

V

-0.3 to (Vcc+0.3)

EN

Input Voltage Range

*1

V

-0.3 to 5.5

FB,BTVCC,TL_CTRL,SYNC

Input Voltage Range

—

V

200

MM (Machine Model)

—

kV

2

HBM (Human Body Model)

ESD

*2

°C

– 40 to + 150

Operating junction temperature

*2

°C

– 55 to + 150

Storage temperature

Notes

Unit

Rating

Symbol

Parameter

*2

°C

– 40 to + 85

Operating free-air temperature

*1

V

40

Vcc

Supply voltage

Notes) Do not apply external currents and voltages to any pin not specifically mentioned.

This product may sustain permanent damage if subjected to conditions higher than the above stated absolute maximum rating.

This rating is the maximum rating and device operating at this range is not guaranteeable as it is higher than our stated

recommended operating range. When subjected under the absolute maximum rating for a long time, the reliability of the product

may be affected.

Vcc is voltage for VCC, PVCC1 and PVCC2. VCC = PVCC1 = PVCC2.

*1:The values under the condition not exceeding the above absolute maximum ratings and the power dissipation.

*2:Except for the power dissipation, operating ambient temperature, and storage temperature, all ratings are for Ta = 25

°C.

*3:( Vcc – 5.5 ) V must not be exceeded – 0.3 V, and ( Vcc + 0.3 ) V must not be exceeded 60 V

*4:( Vcc + VREG ) V must not be exceeded 60 V

*5:( Vcc + 0.3 ) V must not be exceeded 60 V