PRODUCTS

Photo Transistor

TYPE

SCM-014TB

PAGE

／

< Specifications (Precautions and Prohibitions) >

● Safety Precautions

1) The products are designed for application in ordinary electronic equipment (AV equipment,

OA equipment, telecommunication equipment, home appliances, amusement equipment, etc.).

If the products are to be used in devices requiring extremely high reliability (medical equipment, transport

equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car

accessories, safety devices, etc.) and whose malfunction or operational error may endanger human life, please

consult with the Company’s sales staff in advance.

If product malfunctions may result in serious damage,

including that to human life, sufficient fail-safe measures must be taken, including the following:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits in the case of single-circuit failure

2) The products are designed for use in a standard environment and not in any special environments.

Application of the products in a special environment can deteriorate product performance.

Accordingly,

verification and confirmation of product performance, prior to use, is recommended if used under the following

conditions:

[a] Use in various types of liquid, including water, oils, chemicals, and organic solvents

[b] Use outdoors where the products are exposed to direct sunlight, or in dusty places

[c] Use in places where the products are exposed to sea winds or corrosive gases, including

[d] Use in places where the products are exposed to static electricity or electromagnetic

waves

[e] Use in proximity to heat-producing components, plastic cords, or other flammable items

[f] Use involving sealing or coating the products with resin or other coating materials

[g] Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after

soldering

[h] Use of the products in places subject to dew condensation

3) The products are not radiation resistant.

4) The Company is not responsible for any problems resulting from use of the products under conditions not

recommended herein.

5) The Company should be notified of any product safety issues.

Moreover, product safety issues should be

periodically monitored by the customer.

● Precautions Regarding Application Examples and External Circuits

1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the

characteristics of the products and external components, including transient characteristics, as well as static

characteristics.

2) The application examples, their constants, and other types of information contained herein are applicable only

when the products are used in accordance with standard methods.

Therefore, if mass production is intended,

sufficient consideration to external conditions must be made.

DATE： Jun

./26/2008

SPECIFICATION No.：

TENTATIVE

DESIGN

S.Yasuda

CHECK

M.Kobayakawa

APPROVAL

S.Isokawa

REV.：

－

TSZ22111･03