ES2000

Flame-retardant, adhesive-lined heat-shrinkable

tubing (extended temperature range)

Adhesive-lined ES2000 heat-

shrinkable tubing is specifically

designed to meet automotive industry

requirements for environmental

sealing and electrical insulation of

automotive wire splices, terminations,

and components.

ES2000 tubing has an outer jacket

of radiation-crosslinked, semirigid

polyolefin. Flame-retardant and

mechanically tough, the jacket

provides strain relief and abrasion

protection of wire splices and

mechanically sensitive components.

The inner layer of the tubing is a

unique hot-melt adhesive, specially

formulated to adhere to all major

types of automotive wire insulation

and to perform well at an extended

temperature range. The adhesive

forms an effective barrier against

automotive fluids and moisture,

helping to protect the harness

from the effects of corrosion and

water wicking.

Because ES2000 tubing has a high

shrink ratio, only a few sizes are

needed to cover a wide range of

splice and component diameters.

ES2000 tubing dimensions have been

engineered to provide low-cost

sealing solutions on multiple-wire

splices (up to seven wires per side),

using standard Tyco Electronics

application equipment.

Temperature rating

Full recovery temperature:

135°C

Continuous operating temperature:

–40°C to 130°C

Specifications*

Type

Raychem

UL

ES2000

RT-1112

E85381

*When ordering, always specify latest issue.



Dimensions (millimeters/inches)

Inside diameter (including core)

Recovered wall thickness**

D (min.)

d (max.)

W

W1

W2

Expanded

Recovered after

Minimum

Minimum

Minimum

Part number

as supplied

heating

total wall

jacket wall

adhesive wall

ES2000-No.1

5.72

0.225

1.27

0.050

1.20

0.047

0.64

0.025

0.56

0.022

ES2000-No.2

7.44

0.293

1.65

0.065

1.52

0.060

0.76

0.030

0.76

0.030

ES2000-No.3

10.85

0.427

2.41

0.095

1.91

0.075

0.89

0.035

1.02

0.040

ES2000-No.4

17.78

0.700

4.45

0.175

2.41

0.095

1.04

0.041

1.37

0.054

**Wall thickness will be less if tubing recovery is restricted during shrinkage.

Ordering information

Color

Black

Size selection

Consult manufacturer’s recommended size selection guidelines.

Standard packaging

Cut pieces. See reverse for information on standard cut lengths.

Marking

Tubing will be marked with the number size (for example, ES-1, ES-2, ES-3, or ES-4).

Ordering description

Specify product name, size, color, and cut length; for example, ES2000-No.2-0-50MM (0=Black).

D

W

d

W2

W1

Expanded as supplied

Fully recovered

after heating