![]() |
Electronic Components Datasheet Search |
|
93AA86A Datasheet(PDF) 10 Page - Microchip Technology |
|
93AA86A Datasheet(HTML) 10 Page - Microchip Technology |
10 / 38 page ![]() 93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C DS21797L-page 10 2003-2012 Microchip Technology Inc. 2.9 Write All (WRAL) The Write All (WRAL) instruction will write the entire memory array with the data specified in the command. The self-timed auto-erase and programming cycle is initiated by the rising edge of CLK on the last data bit. Clocking of the CLK pin is not necessary after the device has entered the WRAL cycle. The WRAL command does include an automatic ERAL cycle for the device. Therefore, the WRAL instruction does not require an ERAL instruction, but the chip must be in the EWEN status. The DO pin indicates the Ready/Busy status of the device if CS is brought high after a minimum of 250 ns low (TCSL). VCC must be 4.5V for proper operation of WRAL. FIGURE 2-7: WRAL TIMING Note: The write sequence requires a logic high signal on the PE pin prior to the rising edge of the last data bit. Note: After the Write All cycle is complete, issuing a Start bit and then taking CS low will clear the Ready/Busy status from DO. CS CLK DI DO HIGH-Z 100 01 x ••• x Dx ••• D0 High-Z Busy Ready TWL TCSL TSV TCZ |
Similar Part No. - 93AA86A |
|
Similar Description - 93AA86A |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |