|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

2013-04-0014

PT0348-2

05/10/13

3

PI3A412

Small Plastic Package, Quad SPDT Analog Switch

Maximum Ratings

Storage Temperature………………………………….. -65℃ to +150℃

Ambient Temperature with Power Applied......................-40℃ to +85℃

Continuous Current NO_NC_COM_…………………………±400mA

Peak Current NO_NC_COM_

(pulsed at 1ms 10% duty cycle) ………………………….. ±500mA

ESD (HBM) ………………………………………………….. 4kV

Recommended Operating Conditions

Symbol

Parameter

Conditions

Min.

Typ.

Max.

Unit

Operating Voltage

-

1.8

-

4.2

V

Control Input Voltage

-

0

-

V

Switch Input Voltage

-

-0.3

-

V

Operating Temperature

-

-40

25

85

°C

Input Rise and Fall Time

-

0

-

10

ns/V

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional

operation of the device at these or any other

conditions above those indicated in the operational

sections of this specification is not implied.

Exposure to absolute maximum rating conditions

for extended periods may affect reliability.

The input and output negative voltage ratings may

be exceeded if the input and output diode current

ratings are observed.

Control input must be held HIGH or LOW; it must

not float.