ADA4500-2ACPZ-R7 datasheet(8/25 Pages) AD

Part #	ADA4500-2ACPZ-R7

Description	10 MHz, 14.5 nV/?숰z, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

Download	25 Pages

Scroll/Zoom	100%

Manufacturer	AD [Analog Devices]

Direct Link	http://www.analog.com

Logo

8 / 25 page

Data Sheet

ADA4500-2

Rev. A | Page 7 of 24

ABSOLUTE MAXIMUM RATINGS

Table 3.

Parameter

Rating

Supply Voltage

6 V

Input Voltage

(V−) − 0.2 V to (V+) + 0.2 V

Differential Input Voltage1

(V−) − 0.2 V to (V+) + 0.2 V

Output Short-Circuit Duration

Indefinite

Storage Temperature Range

−65°C to +150°C

Operating Temperature Range

−40°C to +125°C

Junction Temperature Range

−65°C to +150°C

Lead Temperature (Soldering, 60 sec)

300°C

1 Differential input voltage is limited to 5.6 V or the supply voltage + 0.6 V,

whichever is less.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL RESISTANCE

θJA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 4. Thermal Resistance

Package Type

θ

JA

θ

JC

Unit

8-Lead MSOP (RM-8)1

142

45

°C/W

8-Lead LFCSP (CP-8-12)2, 3

85

2

°C/W

1 Thermal numbers were simulated on a 4-layer JEDEC printed circuit board (PCB).

2 Thermals numbers were simulated on a 4 layer JEDEC PCB with the exposed

pad soldered to the PCB.

3 θ

JC was simulated at the exposed pad on the bottom of the package.

ESD CAUTION

Similar Part No. - ADA4500-2ACPZ-R7

Manufacturer	Part #	Datasheet	Description
Analog Devices	ADA4500-2ACPZ-R7	1Mb / 24P	10 MHz, 14.5 nV/?숰z, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier REV. A
Analog Devices	ADA4500-2ACPZ-R7	1Mb / 25P	10 MHz, 14.5 nV/?숰z, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

More results

Similar Description - ADA4500-2ACPZ-R7

Manufacturer	Part #	Datasheet	Description
Analog Devices	ADA4500-2	1Mb / 25P	10 MHz, 14.5 nV/?숰z, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier
	ADA4500-2	1Mb / 24P	10 MHz, 14.5 nV/?숰z, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier REV. A
	ADA4505-2	708Kb / 20P	10 關A, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier REV. 0
	ADA4505-1	846Kb / 24P	10 關A, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifiers
	ADA4505-4	825Kb / 20P	10 關A, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifiers REV. A
	AD8506	535Kb / 20P	20 關A Maximum, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifiers REV. A
	AD8505	655Kb / 20P	20 關A Maximum, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifiers
	ADA4505-2ARMZ	846Kb / 24P	10 UA, Rail-to-Rail I/O, Zero InputCrossover Distortion Amplifiers Rev. D
Texas Instruments	TLV369	1Mb / 27P	[Old version datasheet] Cost-Optimized, 800-nA, 1.8-V, Rail-to-Rail I/O Operational Amplifier with Zero-Crossover Distortion
Texas Instruments	LMV951	1Mb / 29P	[Old version datasheet] 1-V, 2.7-MHz, Zero Crossover Rail-to-Rail Input

More results

ADA4500-2ACPZ-R7 Datasheet(PDF) 8 Page - Analog Devices

ADA4500-2ACPZ-R7 Datasheet(HTML) 8 Page - Analog Devices

Similar Part No. - ADA4500-2ACPZ-R7

Similar Description - ADA4500-2ACPZ-R7

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Datasheet Download

Link URL