 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
H5PS5182GFRS6C Datasheet(PDF) 36 Page - Hynix Semiconductor |
|
||||||||||||||||||||||||||||||
H5PS5182GFRS6C Datasheet(HTML) 36 Page - Hynix Semiconductor |
|
|
36 / 64 page  Rev.1.7 / Feb. 2013 36 H5PS5162GFR series 1) For all input signals the total tIS(setup time) and tIH(hold) time) required is calculated by adding the data- sheet value to the derating value listed in above Table. Setup(tIS) nominal slew rate for a rising signal is defined as the slew rate between the last crossing of VREF(dc) and the first crossing of VIH(ac)min. Setup(tIS) nominal slew rate for a falling signal is defined as the slew rate between the last crossing of VREF(dc) and the first crossing of VIL(ac)max. If the actual signal is always earlier than the nominal slew rate for line between shaded ‘VREF(dc) to ac region’, use nominal slew rate for derating value(see fig a.) If the actual signal is later than the nominal slew rate line anywhere between shaded ‘VREF(dc) to ac region’, the slew rate of a tangent line to the actual signal from the ac level to dc level is used for derating value(see Fig b.) Hold(tIH) nominal slew rate for a rising signal is defined as the slew rate between the last crossing of VIL(dc)max and the first crossing of VREF(dc). Hold(tIH) nominal slew rate for a falling signal is defined as the slew rate between the last crossing of VREF(dc). If the actual signal is always later than the nominal slew rate line between shaded ‘dc to VREF(dc) region’, use nominal slew rate for derating value(see Fig.c) If the actual signal is earlier than the nominal slew rate line anywhere between shaded ‘dc to VREF(dc) region’, the slew rate of a tangent line to the actual signal from the dc level to VREF(dc) level is used for derating value(see Fig d.) Although for slow rates the total setup time might be negative(i.e. a valid input signal will not have reached VIH/IL(ac) at the time of the rising clock transition) a valid input signal is still required to complete the transi- tion and reach VIH/IL(ac). For slew rates in between the values listed in table, the derating values may obtained by linear interpolation. These values are typically not subject to production test. They are verified by design and characterization. △tIS △tIH △tIS △tIH △tIS △tIH Uni ts Note s 4.0 +150 +94 +180 +124 +210 +154 ps 1 3.5 +143 +89 +173 +119 +203 +149 ps 1 3.0 +133 +83 +163 +113 +193 +143 ps 1 2.5 +120 +75 +150 +105 +180 +135 ps 1 2.0 +100 +45 +130 +75 +150 +105 ps 1 1.5 +67 +21 +97 +51 +127 +81 ps 1 1.0 0 0 +30 +30 +60 +60 ps 1 0.9 -5 -14 +25 +16 +55 +46 ps 1 0.8 -13 -31 +17 -1 +47 +29 ps 1 0.7 -22 -54 +8 -24 +38 +6 ps 1 0.6 -34 -83 -4 -53 +26 -23 ps 1 0.5 -60 -125 -30 -95 0 -65 ps 1 0.4 -100 -188 -70 -158 -40 -128 ps 1 0.3 -168 -292 -138 -262 -108 -232 ps 1 0.25 -200 -375 -170 -345 -140 -315 ps 1 0.2 -325 -500 -395 -470 -265 -440 ps 1 0.15 -517 -708 -487 -678 -457 -648 ps 1 0.1 -1000 -1125 -970 -1095 -940 -1065 ps 1 tIS, tIH Derating Values for DDR2-667, DDR2-800 Command / Address Slew rate(V/ns) 2.0 V/ns CK, CK Differential Slew Rate 1.5 V/ns 1.0 V/ns |
Similar Part No. - H5PS5182GFRS6C |
|
Similar Description - H5PS5182GFRS6C |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.NET |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
allmanual.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
