Electronic Components Datasheet Search |
|
SI3050-E-GTR Datasheet(PDF) 8 Page - Silicon Laboratories |
|
SI3050-E-GTR Datasheet(HTML) 8 Page - Silicon Laboratories |
8 / 112 page Si3050 + Si3018/19 8 Rev. 1.31 Table 4. AC Characteristics (VD = 3.0 to 3.6 V, TA = 0 to 70 °C for F/K-Grade, Fs = 8000 Hz, see "2. Typical Application Schematic" on page 17) Parameter Symbol Test Condition Min Typ Max Unit Sample Rate Fs 8 — 16 kHz PCLK Input Frequency PCLK 256 — 8192 kHz Receive Frequency Response Low –3 dBFS Corner, FILT = 0 — 5 — Hz Receive Frequency Response Low –3 dBFS Corner, FILT = 1 — 200 — Hz Transmit Full-Scale Level1 VFS FULL = 0 (0 dBm) — 1.1 — VPEAK FULL = 1 (+3.2 dBm)2 —1.58 — VPEAK FULL2=1(+6.0 dBm)2 —2.16 — VPEAK Receive Full-Scale Level1,3 VFS FULL = 0 (0 dBm) — 1.1 — VPEAK FULL = 1 (+3.2 dBm)2 —1.58 — VPEAK FULL2=1(+6.0 dBm)2 —2.16 — VPEAK Dynamic Range4,5,6 DR ILIM = 0, DCV = 11, MINI=00 DCR = 0, IL =100 mA —80 — dB Dynamic Range4,5,6 DR ILIM = 0, DCV = 00, MINI=11 DCR = 0, IL =20mA —80 — dB Dynamic Range4,5,6 DR ILIM = 1, DCV = 11, MINI=00 DCR = 0, IL =50mA —80 — dB Transmit Total Harmonic Distortion6,7 THD ILIM = 0, DCV = 11, MINI=00 DCR = 0, IL =100 mA —–72 — dB Transmit Total Harmonic Distortion6,7 THD ILIM = 0, DCV = 00, MINI=11 DCR = 0, IL =20mA —–78 — dB Receive Total Harmonic Distortion6,7 THD ILIM = 0, DCV = 00, MINI=11 DCR = 0, IL =20mA —–78 — dB Receive Total Harmonic Distortion6,7 THD ILIM = 1,DCV = 11, MINI=00 DCR = 0, IL =50mA —–78 — dB Notes: 1. Measured at TIP and RING with 600 termination at 1 kHz, as shown in Figure 1 on page 6. 2. With FULL = 1, the transmit and receive full-scale level of +3.2 dBm can be achieved with a 600 ac termination. While the transmit and receive level in dBm varies with reference impedance, the DAA will transmit and receive 1 dBV into all reference impedances. With FULL2 = 1, the transmit and receive full-scale level of +6.0 dBm can be achieved with a 600 termination. In this mode, the DAA will transmit and receive +1.5 dBV into all reference impedances. 3. Receive full-scale level produces –0.9 dBFS at DTX. 4. DR = 20 x log (RMS VFS/RMS Vin) + 20 x log (RMS Vin/RMS noise). The RMS noise measurement excludes harmonics. Here, VFS is the 0 dBm full-scale level per Note 1 above. 5. Measurement is 300 to 3400 Hz. Applies to both transmit and receive paths. 6. Vin=1kHz, –3 dBFS. 7. THD = 20 x log (RMS distortion/RMS signal). 8. DRCID = 20 x log (RMS VCID/RMS VIN) + 20 x log (RMS VIN/RMS noise). VCID is the 1.5 V full-scale level with the enhanced caller ID circuit. With the typical CID circuit, the VCID full-scale level is 6 V peak, and the DRCID decreases to 50 dB. 9. Refer to Tables 10–11 for relative gain accuracy characteristics (passband ripple). 10. Analog hybrid only. ZACIM controlled by ACIM in Register 30. |
Similar Part No. - SI3050-E-GTR |
|
Similar Description - SI3050-E-GTR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |