Electronic Components Datasheet Search |
|
RDE5C1H270J0C03 Datasheet(PDF) 11 Page - Murata Manufacturing Co., Ltd. |
|
RDE5C1H270J0C03 Datasheet(HTML) 11 Page - Murata Manufacturing Co., Ltd. |
11 / 19 page C49E.pdf May.10,2011 RDE Series (Only for Commercial) Specifications and Test Methods 7 Q/Dissipation Factor (D.F.) 30pF min.: Q U1,000 30pF max.: Q U400+20C C: Nominal capacitance (pF) Char. X7R: 0.025 max. Char. F, Y5V: 0.05 max. Char. X7S: 0.125 max. The capacitance, Q/D.F. should be measured at 25˚C at the frequency and voltage shown in the table. Temperature Compensating Type High Dielectric Constant Type 6 Capacitance Within the specified tolerance The insulation resistance should be measured with a DC voltage not exceeding the rated voltage (DC500 ±50V in case of rated vlotage: DC630V) at normal temperature and humidity and within 2 min. of charging. (Charge/Discharge current V 50mA) 5 Insulation Resistance Between Terminals Rated Voltage: DC25V, DC50V, DC100V 10,000M Ω min. or 500MΩ • µF min. whichever is smaller Rated Voltage: DC250V, DC630V 10,000M Ω min. or 100MΩ • µF min. whichever is smaller The capacitors should not be damaged when test voltages of Table are applied between the terminals for 1 to 5 sec. (Charge/Discharge current V 50mA) Temperature Compensating Type High Dielectric Constant Type 4 Dielectric Strength Between Terminals No defects or abnormalities Body Insulation No defects or abnormalities The capacitor is placed in a container with metal balls of 1mm diameter so that each terminal, short-circuited, is kept approximately 2mm from the balls as shown in the figure, and 250% of the rated voltage (200% of the rated voltage in case of rated voltage: DC100V, DC250V, DC630V) is impressed for 1 to 5 sec. between capacitor terminals and metal balls. (Charge/Discharge current V 50mA) Visual inspection, Vernier Caliper 3 Dimension and Marking See previous pages Visual inspection 2 Appearance No defects or abnormalities – 1 Operating Temperature Range -55 to +125˚C Char. X7R, X7S: -55 to +125˚C Char. F: -25 to +85˚C Char. Y5V: -30 to +85˚C No. Test Method Specifications Temperature Compensating Type High Dielectric Constant Type Item Approx. 2mm Metal balls Capacitance Item C V1000pF 1 ±0.1MHz AC0.5 to 5V (r.m.s.) C G1000pF 1 ±0.1kHz AC1 ±0.2V (r.m.s.) Frequency Voltage Capacitance Item C V10µF 1 ±0.1kHz AC1 ±0.2V (r.m.s.) C G10µF 120 ±24Hz AC0.5 ±0.1V (r.m.s.) Frequency Voltage Test Voltage 300% of the rated voltage Rated Voltage DC50V, DC100V Test Voltage 250% of the rated voltage 200% of the rated voltage 150% of the rated voltage Rated Voltage DC25V, DC50V DC100V, DC250V DC630V Continued on the following page. Specifications and Test Methods 34 4 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. |
Similar Part No. - RDE5C1H270J0C03 |
|
Similar Description - RDE5C1H270J0C03 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |