Copyright

© ANPEC Electronics Corp.

Rev. A.8 - Apr., 2010

APL1582

www.anpec.com.tw

5

0

5

10

15

20

25

30

35

40

0

0.5

1

1.5

2

2.5

3

0

5

10

15

20

25

30

35

40

0

0.5

1

1.5

2

2.5

3

Typical Operating Characteristics (Cont.)

Control Pin Current vs. Output Current

Output Current (A)

Control Pin Current vs. Output Current

Output Current (A)

T

T

T

T

T

T

PIN

NO.

NAME

I/O

FUNCTION

1

VSENSE

I

Positive side of the reference voltage, which allows remote sensing to obtain excellent

load regulation.

2

ADJ

O

Negative side of the reference voltage, which allows to use resistor divider to set an

expect output voltage. A small bypass capacitor can be connected from this pin to the

ground to improve PSRR performance.

3

VOUT

O

Output pin of the regulator, which connects to the TAB. A minimum of 10

µF capacitor

must be connected from this pin to ground to ensure the stability.

4

VCONTROL

I

Supply pin of the control circuitry, which must be always higher than VOUT for the

device to regulate. (See Electrical Characteristics)

5

VIN

I

Power input pin of the regulator, which must be always higher than VOUT for the device

to regulate. (See Electrical Characteristics)

Pin Description