Electronic Components Datasheet Search |
|
APL5610CCI-TRG Datasheet(PDF) 3 Page - Anpec Electronics Coropration |
|
APL5610CCI-TRG Datasheet(HTML) 3 Page - Anpec Electronics Coropration |
3 / 17 page Copyright © ANPEC Electronics Corp. Rev. A.7 - May., 2011 APL5610/A/B/C www.anpec.com.tw 3 Recommended Operating Conditions (Note 3) Symbol Parameter Range Unit VCC VCC Input Voltage (VCC to GND) 4.5 to 13.5 V VEN EN to GND Voltage 0 to 5.5 V VOUT VOUT Output Voltage (Note4) 0.8/0.5 ~ VIN - VDROP V TA Ambient Temperature -40 to 85 oC TJ Junction Temperature -40 to 125 oC Note 3: Refer to the typical application circuit. Note 4: VDROP defined as the VIN -VOUT voltage at VOUT = 98% normal VOUT. The linear regulator must provide the output MOSFET with sufficient Gate-to-Source voltage (VGS = VCC - VOUT) to regulate the output voltage. Electrical Characteristics Unless otherwise specified, these specifications apply over VCC = 5/12V, TA = -40 to 85 oC. Typical values are at T A =25 oC. APL5610/A/B/C Symbol Parameter Test Conditions Min. Typ. Max. Unit SUPPLY CURRENT VCC = 12V - 0.8 1.0 ICC VCC Supply Current VCC = 5V - 0.8 1.0 mA VCC = 12V, EN=GND - - 5 ISD VCC Shutdown Current VCC = 5V, EN=GND - - 5 µA POWER-ON-RESET (POR) VCC POR Threshold VCC rising 3.8 4.0 4.2 V VCC POR Hysteresis - 0.4 - V REFERENCE VOLTAGE APL5610/A - 0.8 - V VREF Reference Voltage VCC = 12V, TA = 25 oC APL5610B/C - 0.5 - V Reference Voltage Accuracy VCC = 12V, TA = 25 oC -0.5 - 0.5 % Line Regulation VCC = 4.5V to 13.2V -1.5 - 1.5 % FB Input Current -100 - 100 nA ERROR AMPLIFIER Unity Gain Bandwidth VCC = 5/12V - 2 - MHz Open Loop DC Gain VCC =12V, No Load 60 80 - dB PSRR Power Supply Rejection Ratio VCC =12V, 100Hz, No Load 50 - - dB VCC =12V, IDRV (SOURCE) = 5mA, VFB = 0.6V 11.2 11.5 - VDRV (high) DRV High Voltage VCC =5V, IDRV (SOURCE) = 5mA, VFB = 0.6V - 4.7 - V VCC =12V, IDRV (SINK) = 5mA, VFB = 1V - 0.5 1 VDRV (low) DRV Low Voltage VCC =5V, IDRV (SINK) = 5mA, VFB = 1V - 0.8 - V VCC =12V, VDRV =6V, VFB = 0.6V - 50 - IDRV (source) DRV Source Current VCC =5V, VDRV =2.5V, VFB = 0.6V - 10 - mA VCC =12V, VDRV =6V, VFB = 1V - 40 - IDRV (sink) DRV Sink Current VCC =5V, VDRV =2.5V, VFB = 1V - 10 - mA |
Similar Part No. - APL5610CCI-TRG |
|
Similar Description - APL5610CCI-TRG |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |