5275

COMPLEMENTARY OUTPUT

POWERHALL

Dimensions in Inches

(controlling dimensions)

Dimensions in Millimeters

(for reference only)

45

°

Dwg. MH-009C in

0.063

0.059

0.033

0.015

0.016

0.050

BSC

1234

45

°

SEE NOTE

0.208

0.203

0.138

0.133

0.600

0.560

0.085

MAX

45

°

Dwg. MH-009C mm

1.60

1.50

0.84

0.38

0.41

1.27

BSC

1234

45

°

SEE NOTE

5.28

5.16

3.51

3.38

15.24

14.23

2.16

MAX

NOTES:

1. Tolerances on package height and width represent allowable mold offsets. Dimensions given are measured at the widest point (parting line).

2. Exact body and lead configuration at vendor’s option within limits shown.

3. Height does not include mold gate flash.

4. Recommended minimum PWB hole diameter to clear transition area is 0.035” (0.89 mm).

5. Where no tolerance is specified, dimension is nominal.

Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from

the detail specifications as may be required to permit improvements in the design of its products.

The information included herein is believed to be accurate and reliable. However, Allegro

MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or

other rights of third parties which may result from its use.