Electronic Components Datasheet Search |
|
ADG1223BRMZ1 Datasheet(PDF) 8 Page - Analog Devices |
|
ADG1223BRMZ1 Datasheet(HTML) 8 Page - Analog Devices |
8 / 16 page ADG1221/ADG1222/ADG1223 Rev. A | Page 8 of 16 TERMINOLOGY IDD The positive supply current. ISS The negative supply current. VD (VS) The analog voltage on Terminal D and Terminal S. RON The ohmic resistance between Terminal D and Terminal S. RFLAT(ON) Flatness is defined as the difference between the maximum and minimum value of on resistance, as measured over the specified analog signal range. IS (Off) The source leakage current with the switch off. ID (Off) The drain leakage current with the switch off. ID, IS (On) The channel leakage current with the switch on. VINL The maximum input voltage for Logic 0. VINH The minimum input voltage for Logic 1. IINL (IINH) The input current of the digital input. CS (Off) The off switch source capacitance, measured with reference to ground. CD (Off) The off switch drain capacitance, measured with reference to ground. CD, CS (On) The on switch capacitance, measured with reference to ground. CIN The digital input capacitance. tON The delay between applying the digital control input and the output switching on (see Figure 26). tOFF The delay between applying the digital control input and the output switching off (see Figure 26). tBBM Off time or on time measured between the 90% points of both switches, when switching from one address state to another (ADG1223 only). QINJ (Charge Injection) A measure of the glitch impulse transferred from the digital input to the analog output during switching. Off Isolation A measure of unwanted signal coupling through an off switch. Crosstalk A measure of unwanted signal that is coupled through from one channel to another as a result of parasitic capacitance. –3 dB Bandwidth The frequency at which the output is attenuated by 3 dB. On Response The frequency response of the on switch. Insertion Loss The loss due to the on resistance of the switch. THD + N (Total Harmonic Noise Plus Distortion) The ratio of the harmonic amplitude plus noise of the signal to the fundamental. ACPSRR (AC Power Supply Rejection Ratio) Measures the ability of a part to avoid coupling noise and spurious signals that appear on the supply voltage pin to the output of the switch. The dc voltage on the device is modulated by a sine wave of 0.62 V p-p. The ratio of the amplitude of signal on the output to the amplitude of the modulation is the ACPSRR. |
Similar Part No. - ADG1223BRMZ1 |
|
Similar Description - ADG1223BRMZ1 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |