LM2904, LM2904A

Electrical characteristics

Doc ID 2471 Rev 14

7/24

520

20

mV

SR

Slew rate

unity gain

0.3

0.2

0.6

V/µs

GBP

Gain bandwidth product f = 100 kHz

0.7

1.1

MHz

THD

Total harmonic distortion

0.02

%

Equivalent input noise voltage

55

nV/

1kHz

≤ f ≤ 20 kHz

120

dB

1.

2.

The direction of the input current is out of the IC. This current is essentially constant, independent of the state of the output,

so there is no change in the loading charge on the input lines.

3.

The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3 V.

damage.

4.

Due to the proximity of external components, ensure that the stray capacitance does not cause coupling between these

external parts. This can typically be detected at higher frequencies because this type of capacitance increases.

Table 3.

(unless otherwise specified) (continued)

Symbol

Parameter

Min.

Typ.

Max.

Unit