Electronic Components Datasheet Search |
|
TPS79318DBVT Datasheet(PDF) 2 Page - Texas Instruments |
|
|
TPS79318DBVT Datasheet(HTML) 2 Page - Texas Instruments |
2 / 20 page www.ti.com ABSOLUTE MAXIMUM RATINGS DISSIPATION RATINGS TABLE TPS793xx SLVS348K – JULY 2001 – REVISED OCTOBER 2007 This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. ORDERING INFORMATION(1) PRODUCT VOUT (2) TPS793xxyyyz XX is nominal output voltage (for example, 28 = 2.8V, 285 = 2.85V, 01 = Adjustable). YYY is package designator. Z is package quantity. (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. (2) Output voltages from 1.2V to 4.8V in 50mV increments are available; minimum order quantities may apply. Contact factory for details and availability. Over operating temperature range (unless otherwise noted) (1) UNIT VIN range –0.3V to 6V VEN range –0.3V to 6V VOUT range –0.3V to 6V Peak output current Internally limited ESD rating, HBM 2kV ESD rating, CDM 500V Continuous total power dissipation See Dissipation Ratings Table Junction temperature range, DBV package –40 °C to +150°C Junction temperature range, YEQ package –40 °C to +125°C Storage temperature range, Tstg –65 °C to +150°C (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. TA ≤ +25°C TA = +70°C TA = +85°C DERATING FACTOR POWER POWER POWER BOARD PACKAGE RθJC RθJA ABOVE TA = +25°C RATING RATING RATING Low-K(1) DBV 65 °C/W 255 °C/W 3.9mW/ °C 390mW 215mW 155mW High-K(2) DBV 65 °C/W 180 °C/W 5.6mW/ °C 560mW 310mW 225mW Low-K(1) YEQ 27 °C/W 255 °C/W 3.9mW/ °C 390mW 215mW 155mW High-K(2) YEQ 27 °C/W 190 °C/W 5.3mW/ °C 530mW 296mW 216mW (1) The JEDEC low-K (1s) board design used to derive this data was a 3-inch x 3-inch, two layer board with 2 ounce copper traces on top of the board. (2) The JEDEC high-K (2s2p) board design used to derive this data was a 3-inch x 3-inch, multilayer board with 1 ounce internal power and ground planes and 2 ounce copper traces on top and bottom of the board. 2 Submit Documentation Feedback Copyright © 2001–2007, Texas Instruments Incorporated |
Similar Part No. - TPS79318DBVT |
|
Similar Description - TPS79318DBVT |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |